This is the latest recevied telemetry packets stored in our database for station/object SQ4HSE-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793176178 | 366 Count | 745 Count | 328 Count | 4.1 VDC | 0 VDC |
| 1793174377 | 357 Count | 726 Count | 320 Count | 4.11 VDC | 0 VDC |
| 1793172576 | 352 Count | 712 Count | 316 Count | 4.11 VDC | 0 VDC |
| 1793170775 | 342 Count | 693 Count | 307 Count | 4.11 VDC | 0 VDC |
| 1793168975 | 331 Count | 672 Count | 297 Count | 4.11 VDC | 0 VDC |
| 1793165377 | 319 Count | 651 Count | 287 Count | 4.11 VDC | 0 VDC |
| 1793163573 | 310 Count | 633 Count | 279 Count | 4.11 VDC | 0 VDC |
| 1793161772 | 300 Count | 606 Count | 270 Count | 4.11 VDC | 0 VDC |
| 1793159972 | 291 Count | 589 Count | 262 Count | 4.11 VDC | 0 VDC |
| 1793158171 | 279 Count | 565 Count | 251 Count | 4.11 VDC | 0 VDC |
| 1793156370 | 270 Count | 549 Count | 243 Count | 4.11 VDC | 0 VDC |
| 1793154570 | 259 Count | 524 Count | 233 Count | 4.11 VDC | 0 VDC |
| 1793152769 | 246 Count | 498 Count | 221 Count | 4.1 VDC | 0 VDC |
| 1793150968 | 235 Count | 472 Count | 211 Count | 4.1 VDC | 0 VDC |
| 1793149243 | 219 Count | 449 Count | 200 Count | 4.1 VDC | 0 VDC |
| 1793147442 | 207 Count | 427 Count | 189 Count | 4.11 VDC | 0 VDC |
| 1793145641 | 197 Count | 407 Count | 180 Count | 4.11 VDC | 0 VDC |
| 1793143840 | 185 Count | 382 Count | 169 Count | 4.11 VDC | 0 VDC |
| 1793142040 | 173 Count | 358 Count | 158 Count | 4.11 VDC | 0 VDC |
| 1793140239 | 161 Count | 333 Count | 147 Count | 4.11 VDC | 0 VDC |
| 1793138438 | 151 Count | 314 Count | 138 Count | 4.11 VDC | 0 VDC |
| 1793136638 | 142 Count | 296 Count | 130 Count | 4.11 VDC | 0 VDC |
| 1793134837 | 132 Count | 276 Count | 121 Count | 4.11 VDC | 0 VDC |
| 1793133037 | 120 Count | 251 Count | 110 Count | 4.11 VDC | 0 VDC |
| 1793131236 | 111 Count | 232 Count | 102 Count | 4.1 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)