This is the latest recevied telemetry packets stored in our database for station/object EA1URO-19. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 03/15/2025 3:48:11 AM+00:00 | 4 VDC | 0 | 0 | 0 | 0 |
| 03/15/2025 2:38:10 AM+00:00 | 4 VDC | 0 | 0 | 0 | 0 |
| 03/15/2025 12:18:08 AM+00:00 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 03/14/2025 11:43:07 PM+00:00 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 03/14/2025 11:08:06 PM+00:00 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 03/14/2025 10:33:13 PM+00:00 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 03/14/2025 9:58:08 PM+00:00 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 03/14/2025 9:23:05 PM+00:00 | 4.05 VDC | 0 | 0 | 0 | 0 |
| 03/14/2025 8:48:07 PM+00:00 | 4.05 VDC | 0 | 0 | 0 | 0 |
| 03/14/2025 8:13:01 PM+00:00 | 4.05 VDC | 0 | 0 | 0 | 0 |
| 03/14/2025 7:38:01 PM+00:00 | 4.05 VDC | 0 | 0 | 0 | 0 |
| 03/14/2025 7:03:00 PM+00:00 | 4.06 VDC | 0 | 0 | 0 | 0 |
| 03/14/2025 4:38:23 PM+00:00 | 4.07 VDC | 0 | 0 | 0 | 0 |
| 03/14/2025 3:28:22 PM+00:00 | 4.07 VDC | 0 | 0 | 0 | 0 |
| 03/14/2025 2:53:21 PM+00:00 | 4.08 VDC | 0 | 0 | 0 | 0 |
| 03/14/2025 2:18:21 PM+00:00 | 4.07 VDC | 0 | 0 | 0 | 0 |
| 03/14/2025 1:08:22 PM+00:00 | 4.08 VDC | 0 | 0 | 0 | 0 |
| 03/14/2025 12:33:17 PM+00:00 | 4.08 VDC | 0 | 0 | 0 | 0 |
| 03/14/2025 11:58:16 AM+00:00 | 4.08 VDC | 0 | 0 | 0 | 0 |
| 03/14/2025 11:23:16 AM+00:00 | 4.08 VDC | 0 | 0 | 0 | 0 |
| 03/14/2025 10:48:15 AM+00:00 | 4.09 VDC | 0 | 0 | 0 | 0 |
| 03/14/2025 9:38:14 AM+00:00 | 3.95 VDC | 0 | 0 | 0 | 0 |
| 03/14/2025 9:03:21 AM+00:00 | 3.95 VDC | 0 | 0 | 0 | 0 |
| 03/14/2025 8:28:13 AM+00:00 | 3.94 VDC | 0 | 0 | 0 | 0 |
| 03/14/2025 6:08:13 AM+00:00 | 3.92 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)