This is the latest recevied telemetry packets stored in our database for station/object EB5TC-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1755552300 | 218 VDC | 0 | 0 | 0 | 0 |
| 1755551400 | 235 VDC | 0 | 0 | 0 | 0 |
| 1755550499 | 249 VDC | 0 | 0 | 0 | 0 |
| 1755549598 | 265 VDC | 0 | 0 | 0 | 0 |
| 1755548698 | 279 VDC | 0 | 0 | 0 | 0 |
| 1755547798 | 290 VDC | 0 | 0 | 0 | 0 |
| 1755546898 | 297 VDC | 0 | 0 | 0 | 0 |
| 1755545997 | 303 VDC | 0 | 0 | 0 | 0 |
| 1755545097 | 308 VDC | 0 | 0 | 0 | 0 |
| 1755544196 | 312 VDC | 0 | 0 | 0 | 0 |
| 1755543296 | 316 VDC | 0 | 0 | 0 | 0 |
| 1755542395 | 319 VDC | 0 | 0 | 0 | 0 |
| 1755541495 | 321 VDC | 0 | 0 | 0 | 0 |
| 1755540595 | 324 VDC | 0 | 0 | 0 | 0 |
| 1755539695 | 326 VDC | 0 | 0 | 0 | 0 |
| 1755538794 | 329 VDC | 0 | 0 | 0 | 0 |
| 1755537802 | 331 VDC | 0 | 0 | 0 | 0 |
| 1755536896 | 333 VDC | 0 | 0 | 0 | 0 |
| 1755535996 | 334 VDC | 0 | 0 | 0 | 0 |
| 1755535101 | 336 VDC | 0 | 0 | 0 | 0 |
| 1755534167 | 336 VDC | 0 | 0 | 0 | 0 |
| 1755533267 | 338 VDC | 0 | 0 | 0 | 0 |
| 1755532366 | 339 VDC | 0 | 0 | 0 | 0 |
| 1755531466 | 340 VDC | 0 | 0 | 0 | 0 |
| 1755530566 | 340 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)