This is the latest recevied telemetry packets stored in our database for station/object BD6IMR-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1767417787 | 5.66 VDC | 0 | 0 | 0 | 0 |
| 1767416887 | 5.66 VDC | 0 | 0 | 0 | 0 |
| 1767415986 | 5.67 VDC | 0 | 0 | 0 | 0 |
| 1767410522 | 4.66 VDC | 0 | 0 | 0 | 0 |
| 1767410499 | 4.67 VDC | 0 | 0 | 0 | 0 |
| 1767410485 | 4.66 VDC | 0 | 0 | 0 | 0 |
| 1767410469 | 4.71 VDC | 0 | 0 | 0 | 0 |
| 1767410451 | 4.8 VDC | 0 | 0 | 0 | 0 |
| 1767410441 | 4.9 VDC | 0 | 0 | 0 | 0 |
| 1767409531 | 5.84 VDC | 0 | 0 | 0 | 0 |
| 1767408630 | 5.78 VDC | 0 | 0 | 0 | 0 |
| 1767408444 | 5.29 VDC | 0 | 0 | 0 | 0 |
| 1767408111 | 4.75 VDC | 0 | 0 | 0 | 0 |
| 1767408075 | 4.58 VDC | 0 | 0 | 0 | 0 |
| 1767408021 | 4.76 VDC | 0 | 0 | 0 | 0 |
| 1767408009 | 4.68 VDC | 0 | 0 | 0 | 0 |
| 1767407995 | 4.61 VDC | 0 | 0 | 0 | 0 |
| 1767407967 | 4.74 VDC | 0 | 0 | 0 | 0 |
| 1767407945 | 4.62 VDC | 0 | 0 | 0 | 0 |
| 1767407925 | 4.8 VDC | 0 | 0 | 0 | 0 |
| 1767407831 | 4.87 VDC | 0 | 0 | 0 | 0 |
| 1767407565 | 5.04 VDC | 0 | 0 | 0 | 0 |
| 1767406665 | 5.63 VDC | 0 | 0 | 0 | 0 |
| 1767405765 | 5.63 VDC | 0 | 0 | 0 | 0 |
| 1767404864 | 5.64 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)