This is the latest recevied telemetry packets stored in our database for station/object DK3RW-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762373336 | 4.32 VDC | 0 | 0 | 0 | 0 |
| 1762372436 | 4.96 VDC | 0 | 0 | 0 | 0 |
| 1762371536 | 4.46 VDC | 0 | 0 | 0 | 0 |
| 1762369736 | 4.83 VDC | 0 | 0 | 0 | 0 |
| 1762368836 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1762367936 | 4.34 VDC | 0 | 0 | 0 | 0 |
| 1762367035 | 4.89 VDC | 0 | 0 | 0 | 0 |
| 1762366135 | 4.7 VDC | 0 | 0 | 0 | 0 |
| 1762365235 | 4.55 VDC | 0 | 0 | 0 | 0 |
| 1762364334 | 4.44 VDC | 0 | 0 | 0 | 0 |
| 1762363426 | 4.49 VDC | 0 | 0 | 0 | 0 |
| 1762362526 | 4.64 VDC | 0 | 0 | 0 | 0 |
| 1762361626 | 4.75 VDC | 0 | 0 | 0 | 0 |
| 1762360724 | 4.25 VDC | 0 | 0 | 0 | 0 |
| 1762359824 | 4.61 VDC | 0 | 0 | 0 | 0 |
| 1762358923 | 4.65 VDC | 0 | 0 | 0 | 0 |
| 1762358022 | 4.86 VDC | 0 | 0 | 0 | 0 |
| 1762357122 | 4.43 VDC | 0 | 0 | 0 | 0 |
| 1762356221 | 4.94 VDC | 0 | 0 | 0 | 0 |
| 1762355321 | 4.34 VDC | 0 | 0 | 0 | 0 |
| 1762354421 | 4.64 VDC | 0 | 0 | 0 | 0 |
| 1762353521 | 4.68 VDC | 0 | 0 | 0 | 0 |
| 1762352620 | 4.62 VDC | 0 | 0 | 0 | 0 |
| 1762351720 | 4.56 VDC | 0 | 0 | 0 | 0 |
| 1762350820 | 4.71 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)