This is the latest recevied telemetry packets stored in our database for station/object DK3RW-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1755722817 | 4.46 VDC | 0 | 0 | 0 | 0 |
| 1755721917 | 4.31 VDC | 0 | 0 | 0 | 0 |
| 1755721016 | 4.7 VDC | 0 | 0 | 0 | 0 |
| 1755720116 | 4.66 VDC | 0 | 0 | 0 | 0 |
| 1755719216 | 4.32 VDC | 0 | 0 | 0 | 0 |
| 1755718316 | 4.88 VDC | 0 | 0 | 0 | 0 |
| 1755717416 | 4.63 VDC | 0 | 0 | 0 | 0 |
| 1755716516 | 4.36 VDC | 0 | 0 | 0 | 0 |
| 1755715615 | 4.77 VDC | 0 | 0 | 0 | 0 |
| 1755714715 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1755713815 | 4.93 VDC | 0 | 0 | 0 | 0 |
| 1755712914 | 4.57 VDC | 0 | 0 | 0 | 0 |
| 1755712015 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1755711114 | 4.25 VDC | 0 | 0 | 0 | 0 |
| 1755710214 | 4.37 VDC | 0 | 0 | 0 | 0 |
| 1755709314 | 4.55 VDC | 0 | 0 | 0 | 0 |
| 1755708413 | 4.84 VDC | 0 | 0 | 0 | 0 |
| 1755707513 | 4.66 VDC | 0 | 0 | 0 | 0 |
| 1755706613 | 4.94 VDC | 0 | 0 | 0 | 0 |
| 1755705713 | 4.98 VDC | 0 | 0 | 0 | 0 |
| 1755704813 | 4.26 VDC | 0 | 0 | 0 | 0 |
| 1755703913 | 4.25 VDC | 0 | 0 | 0 | 0 |
| 1755703013 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1755702112 | 4.36 VDC | 0 | 0 | 0 | 0 |
| 1755701138 | 4.87 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)