This is the latest recevied telemetry packets stored in our database for station/object YC0TBU-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | HDOP* | SAT* | TEMP* | HUMID* | PRESSURE* |
|---|---|---|---|---|---|
| 1769925729 | 1 DOP | 6 SAT | 38 °C | 41 % | 1001 mBar |
| 1769924829 | 1 DOP | 6 SAT | 38 °C | 41 % | 1002 mBar |
| 1769923929 | 1 DOP | 6 SAT | 38 °C | 42 % | 1002 mBar |
| 1769923029 | 1 DOP | 7 SAT | 38 °C | 42 % | 1002 mBar |
| 1769922129 | 1 DOP | 6 SAT | 38 °C | 41 % | 1003 mBar |
| 1769921229 | 4 DOP | 5 SAT | 37 °C | 42 % | 1003 mBar |
| 1769920329 | 3 DOP | 4 SAT | 37 °C | 41 % | 1003 mBar |
| 1769919429 | 3 DOP | 4 SAT | 37 °C | 42 % | 1003 mBar |
| 1769918529 | 7 DOP | 3 SAT | 38 °C | 42 % | 1003 mBar |
| 1769918522 | 99 DOP | 0 SAT | 38 °C | 41 % | 1003 mBar |
| 1769917613 | 1 DOP | 6 SAT | 37 °C | 42 % | 1003 mBar |
| 1769916713 | 2 DOP | 5 SAT | 37 °C | 42 % | 1003 mBar |
| 1769915813 | 1 DOP | 5 SAT | 37 °C | 42 % | 1003 mBar |
| 1769914913 | 3 DOP | 5 SAT | 37 °C | 42 % | 1004 mBar |
| 1769914013 | 2 DOP | 4 SAT | 37 °C | 42 % | 1004 mBar |
| 1769913113 | 2 DOP | 5 SAT | 37 °C | 42 % | 1004 mBar |
| 1769912213 | 3 DOP | 6 SAT | 37 °C | 42 % | 1004 mBar |
| 1769911313 | 2 DOP | 7 SAT | 37 °C | 42 % | 1004 mBar |
| 1769910413 | 99 DOP | 0 SAT | 37 °C | 42 % | 1004 mBar |
| 1769909512 | 99 DOP | 0 SAT | 37 °C | 42 % | 1004 mBar |
| 1769908613 | 4 DOP | 5 SAT | 37 °C | 42 % | 1004 mBar |
| 1769907713 | 1 DOP | 6 SAT | 37 °C | 43 % | 1003 mBar |
| 1769907705 | 3 DOP | 6 SAT | 37 °C | 42 % | 1003 mBar |
| 1769906794 | 2 DOP | 5 SAT | 37 °C | 42 % | 1003 mBar |
| 1769905895 | 16 DOP | 3 SAT | 37 °C | 42 % | 1003 mBar |
*Used Equation Coefficients:
HDOP: 0, 1, 0
SAT: 0, 1, 0
TEMP: 0, 1, 0
HUMID: 0, 1, 0
PRESSURE: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)