This is the latest recevied telemetry packets stored in our database for station/object EA4RCR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1760127388 | 30 | 25 | 949 | 0 | 0 |
| 1760126788 | 30 | 25 | 949 | 0 | 0 |
| 1760126188 | 30 | 26 | 949 | 0 | 0 |
| 1760125588 | 30 | 25 | 949 | 0 | 0 |
| 1760124988 | 30 | 25 | 949 | 0 | 0 |
| 1760124388 | 30 | 26 | 948 | 0 | 0 |
| 1760123788 | 30 | 25 | 948 | 0 | 0 |
| 1760123188 | 30 | 25 | 948 | 0 | 0 |
| 1760122588 | 30 | 25 | 948 | 0 | 0 |
| 1760121988 | 30 | 25 | 948 | 0 | 0 |
| 1760121388 | 30 | 25 | 948 | 0 | 0 |
| 1760120788 | 30 | 25 | 948 | 0 | 0 |
| 1760120188 | 30 | 25 | 948 | 0 | 0 |
| 1760119588 | 30 | 25 | 948 | 0 | 0 |
| 1760118988 | 30 | 25 | 948 | 0 | 0 |
| 1760118388 | 30 | 25 | 948 | 0 | 0 |
| 1760117788 | 30 | 25 | 948 | 0 | 0 |
| 1760117188 | 30 | 25 | 948 | 0 | 0 |
| 1760116588 | 30 | 25 | 948 | 0 | 0 |
| 1760115988 | 30 | 25 | 947 | 0 | 0 |
| 1760115388 | 30 | 26 | 947 | 0 | 0 |
| 1760114788 | 30 | 25 | 947 | 0 | 0 |
| 1760114188 | 30 | 25 | 947 | 0 | 0 |
| 1760113588 | 30 | 25 | 947 | 0 | 0 |
| 1760112988 | 30 | 25 | 947 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)