This is the latest recevied telemetry packets stored in our database for station/object EA5GVP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Pressure* | Humidity* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762355890 | 24 | 1010 | 49 | 0 | 0 |
| 1762355290 | 25 | 1010 | 48 | 0 | 0 |
| 1762354690 | 25 | 1010 | 46 | 0 | 0 |
| 1762354090 | 25 | 1010 | 46 | 0 | 0 |
| 1762353490 | 25 | 1010 | 45 | 0 | 0 |
| 1762352890 | 26 | 1010 | 43 | 0 | 0 |
| 1762352290 | 25 | 1011 | 45 | 0 | 0 |
| 1762351690 | 25 | 1011 | 44 | 0 | 0 |
| 1762351090 | 25 | 1011 | 46 | 0 | 0 |
| 1762350490 | 25 | 1012 | 44 | 0 | 0 |
| 1762349890 | 25 | 1012 | 46 | 0 | 0 |
| 1762349290 | 24 | 1012 | 48 | 0 | 0 |
| 1762348690 | 24 | 1012 | 49 | 0 | 0 |
| 1762348090 | 24 | 1012 | 48 | 0 | 0 |
| 1762347490 | 24 | 1013 | 47 | 0 | 0 |
| 1762346890 | 25 | 1013 | 44 | 0 | 0 |
| 1762346290 | 24 | 1013 | 46 | 0 | 0 |
| 1762345690 | 24 | 1013 | 46 | 0 | 0 |
| 1762345090 | 24 | 1013 | 47 | 0 | 0 |
| 1762344490 | 24 | 1013 | 45 | 0 | 0 |
| 1762343890 | 25 | 1014 | 44 | 0 | 0 |
| 1762341798 | 24 | 1014 | 42 | 0 | 0 |
| 1762341198 | 25 | 1014 | 42 | 0 | 0 |
| 1762340598 | 25 | 1014 | 41 | 0 | 0 |
| 1762339998 | 24 | 1015 | 43 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 1, 0
Pressure: 0, 1, 0
Humidity: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)