This is the latest recevied telemetry packets stored in our database for station/object YC0TBU-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Satellite* | HDOP* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765545524 | 11 | 0 | 0 | 0 | 0 |
| 1765545460 | 10 | 1 | 0 | 0 | 0 |
| 1765545076 | 8 | 0 | 0 | 0 | 0 |
| 1765544947 | 10 | 0 | 0 | 0 | 0 |
| 1765544885 | 9 | 0 | 0 | 0 | 0 |
| 1765544818 | 10 | 0 | 0 | 0 | 0 |
| 1765544754 | 9 | 0 | 0 | 0 | 0 |
| 1765544625 | 10 | 0 | 0 | 0 | 0 |
| 1765544560 | 10 | 0 | 0 | 0 | 0 |
| 1765544476 | 10 | 1 | 0 | 0 | 0 |
| 1765544240 | 10 | 1 | 0 | 0 | 0 |
| 1765544176 | 9 | 1 | 0 | 0 | 0 |
| 1765544109 | 10 | 0 | 0 | 0 | 0 |
| 1765543980 | 11 | 0 | 0 | 0 | 0 |
| 1765543916 | 10 | 0 | 0 | 0 | 0 |
| 1765543852 | 9 | 0 | 0 | 0 | 0 |
| 1765543787 | 10 | 0 | 0 | 0 | 0 |
| 1765543658 | 10 | 0 | 0 | 0 | 0 |
| 1765543336 | 11 | 0 | 0 | 0 | 0 |
| 1765543271 | 11 | 0 | 0 | 0 | 0 |
| 1765543207 | 11 | 0 | 0 | 0 | 0 |
| 1765543142 | 11 | 0 | 0 | 0 | 0 |
| 1765543013 | 10 | 0 | 0 | 0 | 0 |
| 1765542949 | 11 | 0 | 0 | 0 | 0 |
| 1765542884 | 11 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Satellite: 0, 1, 0
HDOP: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)