This is the latest recevied telemetry packets stored in our database for station/object LZ1PDB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1781752892 | 3.18 VDC | 0 | 0 | 0 | 0 |
| 1781751992 | 3.23 VDC | 0 | 0 | 0 | 0 |
| 1781751091 | 3.27 VDC | 0 | 0 | 0 | 0 |
| 1781750191 | 3.3 VDC | 0 | 0 | 0 | 0 |
| 1781749291 | 3.33 VDC | 0 | 0 | 0 | 0 |
| 1781748390 | 3.35 VDC | 0 | 0 | 0 | 0 |
| 1781747490 | 3.37 VDC | 0 | 0 | 0 | 0 |
| 1781746590 | 3.4 VDC | 0 | 0 | 0 | 0 |
| 1781745688 | 3.42 VDC | 0 | 0 | 0 | 0 |
| 1781744787 | 3.42 VDC | 0 | 0 | 0 | 0 |
| 1781743887 | 3.43 VDC | 0 | 0 | 0 | 0 |
| 1781742987 | 3.43 VDC | 0 | 0 | 0 | 0 |
| 1781742087 | 3.45 VDC | 0 | 0 | 0 | 0 |
| 1781741186 | 3.45 VDC | 0 | 0 | 0 | 0 |
| 1781740286 | 3.45 VDC | 0 | 0 | 0 | 0 |
| 1781739385 | 3.45 VDC | 0 | 0 | 0 | 0 |
| 1781738483 | 3.45 VDC | 0 | 0 | 0 | 0 |
| 1781737583 | 3.46 VDC | 0 | 0 | 0 | 0 |
| 1781736682 | 3.46 VDC | 0 | 0 | 0 | 0 |
| 1781735781 | 3.47 VDC | 0 | 0 | 0 | 0 |
| 1781734881 | 3.47 VDC | 0 | 0 | 0 | 0 |
| 1781733980 | 3.45 VDC | 0 | 0 | 0 | 0 |
| 1781733076 | 3.48 VDC | 0 | 0 | 0 | 0 |
| 1781732175 | 3.48 VDC | 0 | 0 | 0 | 0 |
| 1781731275 | 3.48 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)