This is the latest recevied telemetry packets stored in our database for station/object 9M2FUL-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774687707 | 40.27 | 40 | 1008 | 3.6 | 39 |
| 1774687667 | 40.27 | 40 | 1007 | 3.36 | 39 |
| 1774687651 | 40.27 | 40 | 1007 | 3.59 | 40 |
| 1774687613 | 40.27 | 40 | 1007 | 3.59 | 39 |
| 1774687585 | 40.27 | 41 | 1007 | 3.58 | 38 |
| 1774687484 | 40.25 | 41 | 1007 | 3.58 | 40 |
| 1774687461 | 40.22 | 41 | 1007 | 3.62 | 38 |
| 1774687334 | 40.09 | 41 | 1008 | 3.58 | 38 |
| 1774686971 | 40.04 | 42 | 1008 | 3.31 | 32 |
| 1774686218 | 40.13 | 43 | 1007 | 3.53 | 41 |
| 1774686178 | 40.13 | 43 | 1007 | 3.52 | 41 |
| 1774686144 | 40.11 | 43 | 1007 | 3.51 | 39 |
| 1774686108 | 40.09 | 43 | 1007 | 3.53 | 41 |
| 1774686075 | 40.09 | 43 | 1007 | 3.51 | 42 |
| 1774686042 | 40.09 | 43 | 1008 | 3.53 | 40 |
| 1774686015 | 40.09 | 44 | 1008 | 3.53 | 41 |
| 1774685976 | 40.09 | 44 | 1008 | 3.51 | 40 |
| 1774685943 | 40.11 | 44 | 1008 | 3.25 | 37 |
| 1774685927 | 40.11 | 44 | 1008 | 3.25 | 37 |
| 1774685913 | 40.13 | 44 | 1008 | 3.56 | 36 |
| 1774685905 | 40.15 | 44 | 1008 | 3.56 | 36 |
| 1774685601 | 40.27 | 44 | 1008 | 3.49 | 38 |
| 1774685593 | 40.27 | 44 | 1008 | 3.49 | 38 |
| 1774685559 | 40.27 | 44 | 1008 | 3.48 | 41 |
| 1774685530 | 40.29 | 44 | 1008 | 3.48 | 41 |
*Used Equation Coefficients:
Value1: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 0.01, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)