This is the latest recevied telemetry packets stored in our database for station/object EA5JKT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1767361844 | 33 Count | 94 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1767360041 | 32 Count | 94 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1767358237 | 31 Count | 92 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1767356433 | 30 Count | 92 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1767354630 | 29 Count | 91 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1767352826 | 28 Count | 91 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1767351022 | 27 Count | 91 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1767349219 | 26 Count | 91 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1767342549 | 25 Count | 91 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1767340745 | 24 Count | 90 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1767338941 | 23 Count | 90 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1767337137 | 22 Count | 90 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1767335333 | 21 Count | 90 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1767333529 | 20 Count | 89 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1767331726 | 19 Count | 89 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1767329922 | 18 Count | 88 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1767328118 | 17 Count | 88 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1767326358 | 16 Count | 87 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1767324554 | 15 Count | 87 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1767322751 | 14 Count | 87 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1767320947 | 13 Count | 87 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1767319143 | 12 Count | 86 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1767317340 | 11 Count | 86 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1767315536 | 10 Count | 85 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1767313732 | 9 Count | 85 Count | 0 Count | 4.22 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)