This is the latest recevied telemetry packets stored in our database for station/object EA5JKT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1761197740 | 4 Count | 281 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1761195936 | 3 Count | 206 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1761194132 | 2 Count | 150 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1761192328 | 1 Count | 92 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1761190524 | 0 Count | 41 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1761188721 | 23 Count | 1031 Count | 0 Count | 4.16 VDC | 0 VDC |
| 1761186917 | 22 Count | 987 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1761185740 | 21 Count | 959 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1761183937 | 20 Count | 920 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1761182133 | 19 Count | 874 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1761180330 | 18 Count | 832 Count | 0 Count | 4.16 VDC | 0 VDC |
| 1761178526 | 17 Count | 784 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1761176723 | 16 Count | 742 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1761174919 | 15 Count | 699 Count | 0 Count | 4.16 VDC | 0 VDC |
| 1761173116 | 14 Count | 651 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1761171312 | 13 Count | 611 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1761169508 | 12 Count | 569 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1761167705 | 11 Count | 531 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1761165901 | 10 Count | 496 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1761165317 | 9 Count | 486 Count | 0 Count | 4.18 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)