This is the latest recevied telemetry packets stored in our database for station/object EA5JKT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773708857 | 12 Count | 585 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1773707051 | 11 Count | 568 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1773705245 | 10 Count | 555 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1773703439 | 9 Count | 535 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1773701633 | 8 Count | 512 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1773699827 | 7 Count | 486 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1773698556 | 6 Count | 486 Count | 0 Count | 4.18 VDC | 0.14 VDC |
| 1773696749 | 5 Count | 429 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1773695012 | 4 Count | 379 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1773693206 | 3 Count | 311 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1773691400 | 2 Count | 236 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1773689594 | 1 Count | 163 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1773687788 | 0 Count | 89 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1773685983 | 37 Count | 1024 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1773684177 | 36 Count | 921 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1773682371 | 35 Count | 834 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1773680565 | 34 Count | 694 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1773678759 | 33 Count | 575 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1773676953 | 32 Count | 485 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1773675147 | 20 Count | 396 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1773674702 | 19 Count | 396 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1773672896 | 18 Count | 305 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1773671090 | 12 Count | 208 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1773669285 | 9 Count | 136 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1773668975 | 8 Count | 136 Count | 0 Count | 4.25 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)