This is the latest recevied telemetry packets stored in our database for station/object S59ABL-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765031458 | 3.66 VDC | 0 | 0 | 0 | 0 |
| 1765030198 | 3.67 VDC | 0 | 0 | 0 | 0 |
| 1765028214 | 3.67 VDC | 0 | 0 | 0 | 0 |
| 1765026954 | 3.68 VDC | 0 | 0 | 0 | 0 |
| 1765025064 | 3.69 VDC | 0 | 0 | 0 | 0 |
| 1765024433 | 3.7 VDC | 0 | 0 | 0 | 0 |
| 1765023804 | 3.71 VDC | 0 | 0 | 0 | 0 |
| 1765020554 | 3.72 VDC | 0 | 0 | 0 | 0 |
| 1765019925 | 3.72 VDC | 0 | 0 | 0 | 0 |
| 1765017406 | 3.74 VDC | 0 | 0 | 0 | 0 |
| 1765015516 | 3.75 VDC | 0 | 0 | 0 | 0 |
| 1765014886 | 3.75 VDC | 0 | 0 | 0 | 0 |
| 1765013626 | 3.77 VDC | 0 | 0 | 0 | 0 |
| 1765012996 | 3.77 VDC | 0 | 0 | 0 | 0 |
| 1765012366 | 3.78 VDC | 0 | 0 | 0 | 0 |
| 1765011736 | 3.78 VDC | 0 | 0 | 0 | 0 |
| 1765011106 | 3.78 VDC | 0 | 0 | 0 | 0 |
| 1765008586 | 3.8 VDC | 0 | 0 | 0 | 0 |
| 1765006696 | 3.82 VDC | 0 | 0 | 0 | 0 |
| 1765005436 | 3.84 VDC | 0 | 0 | 0 | 0 |
| 1765004806 | 3.85 VDC | 0 | 0 | 0 | 0 |
| 1765004176 | 3.85 VDC | 0 | 0 | 0 | 0 |
| 1765002287 | 3.86 VDC | 0 | 0 | 0 | 0 |
| 1765000396 | 3.87 VDC | 0 | 0 | 0 | 0 |
| 1764999135 | 3.87 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)