This is the latest recevied telemetry packets stored in our database for station/object SQ4VK-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1767327216 | 920 Count | 271 Count | 38 Count | 0 VDC | 0 VDC |
| 1767326316 | 913 Count | 271 Count | 38 Count | 0 VDC | 0 VDC |
| 1767325414 | 906 Count | 271 Count | 38 Count | 0 VDC | 0 VDC |
| 1767324513 | 900 Count | 270 Count | 37 Count | 0 VDC | 0 VDC |
| 1767323613 | 893 Count | 270 Count | 37 Count | 0 VDC | 0 VDC |
| 1767322712 | 886 Count | 269 Count | 37 Count | 0 VDC | 0 VDC |
| 1767321811 | 880 Count | 269 Count | 37 Count | 0 VDC | 0 VDC |
| 1767320911 | 874 Count | 268 Count | 37 Count | 0 VDC | 0 VDC |
| 1767320010 | 866 Count | 266 Count | 36 Count | 0 VDC | 0 VDC |
| 1767319125 | 861 Count | 266 Count | 36 Count | 0 VDC | 0 VDC |
| 1767318225 | 853 Count | 265 Count | 36 Count | 0 VDC | 0 VDC |
| 1767317324 | 847 Count | 264 Count | 36 Count | 0 VDC | 0 VDC |
| 1767316423 | 841 Count | 263 Count | 36 Count | 0 VDC | 0 VDC |
| 1767315522 | 835 Count | 263 Count | 36 Count | 0 VDC | 0 VDC |
| 1767314622 | 828 Count | 262 Count | 36 Count | 0 VDC | 0 VDC |
| 1767313721 | 822 Count | 258 Count | 36 Count | 0 VDC | 0 VDC |
| 1767312820 | 814 Count | 258 Count | 36 Count | 0 VDC | 0 VDC |
| 1767311931 | 808 Count | 257 Count | 36 Count | 0 VDC | 0 VDC |
| 1767311019 | 802 Count | 257 Count | 36 Count | 0 VDC | 0 VDC |
| 1767310118 | 795 Count | 256 Count | 36 Count | 0 VDC | 0 VDC |
| 1767309217 | 788 Count | 256 Count | 36 Count | 0 VDC | 0 VDC |
| 1767308317 | 783 Count | 255 Count | 36 Count | 0 VDC | 0 VDC |
| 1767307416 | 776 Count | 254 Count | 36 Count | 0 VDC | 0 VDC |
| 1767306515 | 769 Count | 253 Count | 36 Count | 0 VDC | 0 VDC |
| 1767305615 | 763 Count | 252 Count | 36 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)