This is the latest recevied telemetry packets stored in our database for station/object OK2PYA-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1764486079 | 960 Count | 190 Count | 80 Count | 0 VDC | 0 VDC |
| 1764484152 | 958 Count | 190 Count | 80 Count | 0 VDC | 0 VDC |
| 1764482225 | 956 Count | 190 Count | 80 Count | 0 VDC | 0 VDC |
| 1764481820 | 955 Count | 190 Count | 80 Count | 0 VDC | 0 VDC |
| 1764479893 | 953 Count | 190 Count | 80 Count | 0 VDC | 0 VDC |
| 1764477966 | 951 Count | 190 Count | 80 Count | 0 VDC | 0 VDC |
| 1764476038 | 949 Count | 190 Count | 80 Count | 0 VDC | 0 VDC |
| 1764474112 | 947 Count | 190 Count | 80 Count | 0 VDC | 0 VDC |
| 1764472185 | 945 Count | 190 Count | 80 Count | 0 VDC | 0 VDC |
| 1764470258 | 943 Count | 190 Count | 80 Count | 0 VDC | 0 VDC |
| 1764468331 | 941 Count | 190 Count | 80 Count | 0 VDC | 0 VDC |
| 1764466405 | 939 Count | 190 Count | 80 Count | 0 VDC | 0 VDC |
| 1764464478 | 937 Count | 190 Count | 80 Count | 0 VDC | 0 VDC |
| 1764462551 | 935 Count | 190 Count | 80 Count | 0 VDC | 0 VDC |
| 1764460624 | 933 Count | 190 Count | 80 Count | 0 VDC | 0 VDC |
| 1764460218 | 932 Count | 190 Count | 80 Count | 0 VDC | 0 VDC |
| 1764458291 | 930 Count | 190 Count | 80 Count | 0 VDC | 0 VDC |
| 1764456364 | 928 Count | 190 Count | 80 Count | 0 VDC | 0 VDC |
| 1764454438 | 926 Count | 190 Count | 80 Count | 0 VDC | 0 VDC |
| 1764452511 | 924 Count | 190 Count | 80 Count | 0 VDC | 0 VDC |
| 1764450584 | 922 Count | 190 Count | 80 Count | 0 VDC | 0 VDC |
| 1764448658 | 920 Count | 190 Count | 80 Count | 0 VDC | 0 VDC |
| 1764446731 | 918 Count | 190 Count | 80 Count | 0 VDC | 0 VDC |
| 1764444804 | 916 Count | 190 Count | 80 Count | 0 VDC | 0 VDC |
| 1764442877 | 914 Count | 190 Count | 80 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)