This is the latest recevied telemetry packets stored in our database for station/object IW2HTZ-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781218004 | 71 Count | 640 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1781217100 | 70 Count | 601 Count | 0 Count | 0.28 VDC | 0.16 VDC |
| 1781216200 | 69 Count | 588 Count | 0 Count | 0.28 VDC | 0.18 VDC |
| 1781215296 | 68 Count | 581 Count | 0 Count | 0.28 VDC | 0.16 VDC |
| 1781214392 | 67 Count | 573 Count | 0 Count | 0.28 VDC | 0.16 VDC |
| 1781213485 | 66 Count | 568 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1781212678 | 65 Count | 561 Count | 0 Count | 0.28 VDC | 0.16 VDC |
| 1781211774 | 64 Count | 554 Count | 0 Count | 0.28 VDC | 0.16 VDC |
| 1781210871 | 63 Count | 547 Count | 0 Count | 0.28 VDC | 0.16 VDC |
| 1781209967 | 62 Count | 538 Count | 0 Count | 0.28 VDC | 0.16 VDC |
| 1781209063 | 61 Count | 530 Count | 0 Count | 0.28 VDC | 0.16 VDC |
| 1781207255 | 59 Count | 516 Count | 0 Count | 0.28 VDC | 0.16 VDC |
| 1781206347 | 58 Count | 506 Count | 0 Count | 0.28 VDC | 0.16 VDC |
| 1781205443 | 57 Count | 502 Count | 0 Count | 0.28 VDC | 0.16 VDC |
| 1781204543 | 56 Count | 493 Count | 0 Count | 0.28 VDC | 0.16 VDC |
| 1781203639 | 55 Count | 486 Count | 0 Count | 0.28 VDC | 0.16 VDC |
| 1781202731 | 54 Count | 480 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1781201827 | 53 Count | 473 Count | 0 Count | 0.28 VDC | 0.16 VDC |
| 1781200927 | 52 Count | 465 Count | 0 Count | 0.28 VDC | 0.16 VDC |
| 1781200023 | 51 Count | 457 Count | 0 Count | 0.28 VDC | 0.16 VDC |
| 1781199115 | 50 Count | 448 Count | 0 Count | 0.28 VDC | 0.16 VDC |
| 1781198215 | 49 Count | 440 Count | 0 Count | 0.28 VDC | 0.16 VDC |
| 1781197307 | 48 Count | 426 Count | 0 Count | 0.28 VDC | 0.16 VDC |
| 1781196407 | 47 Count | 420 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1781195503 | 46 Count | 410 Count | 0 Count | 0.28 VDC | 0.16 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)