This is the latest recevied telemetry packets stored in our database for station/object OK2PYA-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1767970905 | 444 Count | 427 Count | 417 Count | 4.29 VDC | 0 VDC |
| 1767968979 | 405 Count | 388 Count | 380 Count | 4.29 VDC | 0 VDC |
| 1767964725 | 308 Count | 296 Count | 292 Count | 4.28 VDC | 0 VDC |
| 1767962798 | 245 Count | 234 Count | 231 Count | 4.29 VDC | 0 VDC |
| 1767960872 | 233 Count | 221 Count | 221 Count | 4.29 VDC | 0 VDC |
| 1767958945 | 205 Count | 195 Count | 195 Count | 4.29 VDC | 0 VDC |
| 1767957019 | 164 Count | 156 Count | 156 Count | 4.29 VDC | 0 VDC |
| 1767955093 | 130 Count | 124 Count | 124 Count | 4.29 VDC | 0 VDC |
| 1767953161 | 93 Count | 89 Count | 89 Count | 4.29 VDC | 0 VDC |
| 1767951235 | 54 Count | 52 Count | 52 Count | 4.29 VDC | 0 VDC |
| 1767949308 | 15 Count | 15 Count | 15 Count | 4.29 VDC | 0 VDC |
| 1767947376 | 984 Count | 918 Count | 917 Count | 4.29 VDC | 0 VDC |
| 1767937013 | 943 Count | 884 Count | 883 Count | 4.29 VDC | 0 VDC |
| 1767935084 | 903 Count | 846 Count | 845 Count | 4.29 VDC | 0 VDC |
| 1767933157 | 863 Count | 808 Count | 807 Count | 4.29 VDC | 0 VDC |
| 1767931231 | 826 Count | 773 Count | 772 Count | 4.29 VDC | 0 VDC |
| 1767929305 | 787 Count | 736 Count | 735 Count | 4.29 VDC | 0 VDC |
| 1767927378 | 753 Count | 704 Count | 703 Count | 4.29 VDC | 0 VDC |
| 1767925452 | 717 Count | 670 Count | 669 Count | 4.29 VDC | 0 VDC |
| 1767923525 | 686 Count | 641 Count | 640 Count | 4.28 VDC | 0 VDC |
| 1767923121 | 674 Count | 634 Count | 633 Count | 4.29 VDC | 0 VDC |
| 1767921195 | 612 Count | 574 Count | 573 Count | 4.29 VDC | 0 VDC |
| 1767919269 | 578 Count | 542 Count | 541 Count | 4.29 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)