This is the latest recevied telemetry packets stored in our database for station/object IK2XR0-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1751431394 | 74 Count | 55 Count | 0 Count | 4.14 VDC | 0 VDC |
| 1751429587 | 72 Count | 53 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1751427779 | 70 Count | 51 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1751426058 | 68 Count | 49 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1751424250 | 66 Count | 47 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1751422442 | 64 Count | 45 Count | 0 Count | 4.16 VDC | 0 VDC |
| 1751420635 | 62 Count | 43 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1751418828 | 60 Count | 41 Count | 0 Count | 4.16 VDC | 0 VDC |
| 1751417020 | 58 Count | 39 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1751415213 | 56 Count | 37 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1751413405 | 54 Count | 35 Count | 0 Count | 4.16 VDC | 0 VDC |
| 1751411598 | 52 Count | 33 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1751409790 | 50 Count | 31 Count | 0 Count | 4.13 VDC | 0 VDC |
| 1751407983 | 48 Count | 29 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1751406176 | 46 Count | 27 Count | 0 Count | 4.16 VDC | 0 VDC |
| 1751404512 | 44 Count | 25 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1751402704 | 42 Count | 23 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1751400897 | 40 Count | 21 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1751399090 | 38 Count | 19 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1751397282 | 36 Count | 17 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1751395475 | 34 Count | 15 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1751393667 | 32 Count | 13 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1751391860 | 30 Count | 11 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1751390052 | 28 Count | 9 Count | 0 Count | 4.14 VDC | 0 VDC |
| 1751388245 | 26 Count | 7 Count | 0 Count | 4.15 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)