This is the latest recevied telemetry packets stored in our database for station/object HK6JMD-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1743552933 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1743552067 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1743551133 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1743550234 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1743549334 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1743548434 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1743547534 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1743546634 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1743545734 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1743544834 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1743543934 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1743543034 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1743542133 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1743541233 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1743540333 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1743539433 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1743538533 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1743537633 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1743536733 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1743535836 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1743534079 | 4.14 VDC | 0 | 0 | 0 | 0 |
| 1743533133 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1743532233 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1743531332 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1743530432 | 4.22 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)