This is the latest recevied telemetry packets stored in our database for station/object IW1QAF-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkt* | TxPkt* | Batt* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1751660810 | 60 Pkt/10m | 52 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751659605 | 66 Pkt/10m | 11 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751658400 | 66 Pkt/10m | 9 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751657195 | 81 Pkt/10m | 7 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1751655990 | 67 Pkt/10m | 10 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1751654786 | 82 Pkt/10m | 11 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751653581 | 85 Pkt/10m | 1 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751652377 | 77 Pkt/10m | 16 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1751651172 | 68 Pkt/10m | 26 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751649968 | 65 Pkt/10m | 36 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751648764 | 59 Pkt/10m | 32 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1751647560 | 70 Pkt/10m | 34 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751646356 | 97 Pkt/10m | 4 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751645151 | 87 Pkt/10m | 1 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751643947 | 87 Pkt/10m | 3 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751642743 | 65 Pkt/10m | 7 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751641538 | 54 Pkt/10m | 32 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751640334 | 86 Pkt/10m | 4 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751639129 | 87 Pkt/10m | 11 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751637925 | 104 Pkt/10m | 0 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751636721 | 88 Pkt/10m | 1 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1751635517 | 80 Pkt/10m | 1 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1751634312 | 59 Pkt/10m | 8 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1751633107 | 65 Pkt/10m | 2 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751631903 | 73 Pkt/10m | 6 Pkt/10m | 4.9 Volt | 0 | 0 |
*Used Equation Coefficients:
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)