This is the latest recevied telemetry packets stored in our database for station/object IW1QAF-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkt* | TxPkt* | Batt* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1751432898 | 57 Pkt/10m | 3 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751431694 | 55 Pkt/10m | 17 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1751430490 | 45 Pkt/10m | 11 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1751429286 | 54 Pkt/10m | 7 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751428081 | 54 Pkt/10m | 15 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751426877 | 51 Pkt/10m | 12 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751425673 | 50 Pkt/10m | 19 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1751424470 | 60 Pkt/10m | 13 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751423265 | 62 Pkt/10m | 11 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1751422060 | 53 Pkt/10m | 3 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751420855 | 37 Pkt/10m | 2 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751419651 | 70 Pkt/10m | 0 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751418447 | 53 Pkt/10m | 4 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751417242 | 37 Pkt/10m | 5 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751416037 | 51 Pkt/10m | 12 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1751414833 | 61 Pkt/10m | 21 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751413629 | 72 Pkt/10m | 6 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751412425 | 61 Pkt/10m | 16 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751411221 | 57 Pkt/10m | 16 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751410017 | 59 Pkt/10m | 14 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751408812 | 56 Pkt/10m | 17 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751407608 | 50 Pkt/10m | 15 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751406404 | 60 Pkt/10m | 5 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751405200 | 65 Pkt/10m | 2 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1751403995 | 55 Pkt/10m | 14 Pkt/10m | 4.92 Volt | 0 | 0 |
*Used Equation Coefficients:
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)