This is the latest recevied telemetry packets stored in our database for station/object CR7BQX-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Bat* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1757871553 | 3.45 VDC | 2.1 VDC | 0 | 0 | 0 |
| 1757870652 | 3.62 VDC | 2.1 VDC | 0 | 0 | 0 |
| 1757869752 | 3.7 VDC | 2.12 VDC | 0 | 0 | 0 |
| 1757868851 | 3.71 VDC | 2.1 VDC | 0 | 0 | 0 |
| 1757867950 | 3.74 VDC | 2.1 VDC | 0 | 0 | 0 |
| 1757867050 | 3.75 VDC | 2.1 VDC | 0 | 0 | 0 |
| 1757866149 | 3.77 VDC | 2.1 VDC | 0 | 0 | 0 |
| 1757865249 | 3.79 VDC | 2.1 VDC | 0 | 0 | 0 |
| 1757864348 | 3.81 VDC | 2.1 VDC | 0 | 0 | 0 |
| 1757863447 | 3.82 VDC | 2.1 VDC | 0 | 0 | 0 |
| 1757862547 | 3.84 VDC | 2.1 VDC | 0 | 0 | 0 |
| 1757861646 | 3.85 VDC | 2.1 VDC | 0 | 0 | 0 |
| 1757860746 | 3.86 VDC | 2.1 VDC | 0 | 0 | 0 |
| 1757859845 | 3.87 VDC | 2.1 VDC | 0 | 0 | 0 |
| 1757858944 | 3.88 VDC | 2.1 VDC | 0 | 0 | 0 |
| 1757858044 | 3.9 VDC | 2.1 VDC | 0 | 0 | 0 |
| 1757857144 | 3.92 VDC | 2.1 VDC | 0 | 0 | 0 |
| 1757856243 | 3.93 VDC | 2.1 VDC | 0 | 0 | 0 |
| 1757855342 | 3.94 VDC | 2.1 VDC | 0 | 0 | 0 |
| 1757854442 | 3.95 VDC | 2.1 VDC | 0 | 0 | 0 |
| 1757853541 | 3.96 VDC | 2.1 VDC | 0 | 0 | 0 |
| 1757852640 | 3.96 VDC | 2.1 VDC | 0 | 0 | 0 |
| 1757851740 | 3.97 VDC | 2.1 VDC | 0 | 0 | 0 |
| 1757850839 | 3.97 VDC | 2.1 VDC | 0 | 0 | 0 |
| 1757849938 | 3.98 VDC | 2.1 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)