This is the latest recevied telemetry packets stored in our database for station/object DO6GZ-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Satellite* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1771085294 | 3.91 V | 13 | 0 | 0 | 0 |
| 1771085175 | 3.92 V | 12 | 0 | 0 | 0 |
| 1771085055 | 3.92 V | 14 | 0 | 0 | 0 |
| 1771084936 | 3.92 V | 14 | 0 | 0 | 0 |
| 1771084815 | 3.9 V | 14 | 0 | 0 | 0 |
| 1771084696 | 3.93 V | 12 | 0 | 0 | 0 |
| 1771084578 | 3.92 V | 12 | 0 | 0 | 0 |
| 1771084457 | 3.93 V | 13 | 0 | 0 | 0 |
| 1771084338 | 3.94 V | 13 | 0 | 0 | 0 |
| 1771084217 | 3.94 V | 13 | 0 | 0 | 0 |
| 1771084098 | 3.96 V | 13 | 0 | 0 | 0 |
| 1771083980 | 3.96 V | 11 | 0 | 0 | 0 |
| 1771083859 | 3.97 V | 11 | 0 | 0 | 0 |
| 1771083740 | 3.96 V | 9 | 0 | 0 | 0 |
| 1771083619 | 3.96 V | 10 | 0 | 0 | 0 |
| 1771083500 | 3.96 V | 9 | 0 | 0 | 0 |
| 1771083382 | 3.97 V | 0 | 0 | 0 | 0 |
| 1771079676 | 3.97 V | 0 | 0 | 0 | 0 |
| 1771079557 | 3.97 V | 0 | 0 | 0 | 0 |
| 1771079438 | 3.97 V | 0 | 0 | 0 | 0 |
| 1771079317 | 3.97 V | 0 | 0 | 0 | 0 |
| 1771079198 | 3.91 V | 0 | 0 | 0 | 0 |
| 1771079077 | 4.02 V | 0 | 0 | 0 | 0 |
| 1771078958 | 3.87 V | 0 | 0 | 0 | 0 |
| 1771078839 | 3.92 V | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0.01
Satellite: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)