This is the latest recevied telemetry packets stored in our database for station/object CE1RLP-33. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1783379164 | 4.1 VDC | 13 VDC | 0 | 0 | 0 |
| 1783378264 | 4.11 VDC | 13.02 VDC | 0 | 0 | 0 |
| 1783377364 | 4.11 VDC | 13.02 VDC | 0 | 0 | 0 |
| 1783376463 | 4.11 VDC | 13.02 VDC | 0 | 0 | 0 |
| 1783375563 | 4.12 VDC | 13.04 VDC | 0 | 0 | 0 |
| 1783373748 | 4.11 VDC | 13.12 VDC | 0 | 0 | 0 |
| 1783372866 | 4.12 VDC | 13.2 VDC | 0 | 0 | 0 |
| 1783371966 | 4.11 VDC | 13.32 VDC | 0 | 0 | 0 |
| 1783371066 | 4.11 VDC | 13.54 VDC | 0 | 0 | 0 |
| 1783370166 | 4.11 VDC | 14.86 VDC | 0 | 0 | 0 |
| 1783369266 | 4.11 VDC | 14.84 VDC | 0 | 0 | 0 |
| 1783368366 | 4.11 VDC | 14.88 VDC | 0 | 0 | 0 |
| 1783367466 | 4.11 VDC | 14.82 VDC | 0 | 0 | 0 |
| 1783365664 | 4.11 VDC | 14.82 VDC | 0 | 0 | 0 |
| 1783364764 | 4.11 VDC | 14.82 VDC | 0 | 0 | 0 |
| 1783363864 | 4.12 VDC | 14.84 VDC | 0 | 0 | 0 |
| 1783362964 | 4.11 VDC | 14.88 VDC | 0 | 0 | 0 |
| 1783362064 | 4.11 VDC | 14.88 VDC | 0 | 0 | 0 |
| 1783361163 | 4.1 VDC | 14.84 VDC | 0 | 0 | 0 |
| 1783360263 | 4.11 VDC | 14.8 VDC | 0 | 0 | 0 |
| 1783359363 | 4.11 VDC | 14.84 VDC | 0 | 0 | 0 |
| 1783358463 | 4.11 VDC | 14.82 VDC | 0 | 0 | 0 |
| 1783357563 | 4.11 VDC | 14.82 VDC | 0 | 0 | 0 |
| 1783356663 | 4.11 VDC | 14.84 VDC | 0 | 0 | 0 |
| 1783355763 | 4.1 VDC | 14.8 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)