This is the latest recevied telemetry packets stored in our database for station/object SP6ICO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1752333679 | 161 Count | 0 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1752331876 | 160 Count | 0 Count | 0 Count | 4.13 VDC | 0.14 VDC |
| 1752330074 | 159 Count | 0 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1752328271 | 158 Count | 0 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1752326468 | 157 Count | 0 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1752324699 | 156 Count | 0 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1752322896 | 155 Count | 0 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1752321094 | 154 Count | 0 Count | 0 Count | 4.15 VDC | 0.14 VDC |
| 1752319291 | 153 Count | 0 Count | 0 Count | 4.14 VDC | 0.14 VDC |
| 1752317488 | 152 Count | 0 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1752315684 | 151 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1752313882 | 150 Count | 0 Count | 0 Count | 4.15 VDC | 0.14 VDC |
| 1752312079 | 149 Count | 0 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1752310276 | 148 Count | 0 Count | 0 Count | 4.13 VDC | 0.14 VDC |
| 1752308473 | 147 Count | 0 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1752306670 | 146 Count | 0 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1752304867 | 145 Count | 0 Count | 0 Count | 4.13 VDC | 0.14 VDC |
| 1752281642 | 132 Count | 0 Count | 0 Count | 4.14 VDC | 0.14 VDC |
| 1752279840 | 131 Count | 0 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1752278037 | 130 Count | 0 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1752276234 | 129 Count | 0 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1752274431 | 128 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1752272628 | 127 Count | 0 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1752270825 | 126 Count | 0 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1752269022 | 125 Count | 0 Count | 0 Count | 4.22 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)