This is the latest recevied telemetry packets stored in our database for station/object IU2RPR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkt* | TxPkt* | Batt* | Volt Aux* | Ampere Aux* |
|---|---|---|---|---|---|
| 1792976143 | 1 Pkt/10m | 0 Pkt/10m | 4.21 Volt | 4 Volt | -0.07 Ampere |
| 1792974939 | 2 Pkt/10m | 0 Pkt/10m | 4.33 Volt | 4.1 Volt | 0.12 Ampere |
| 1792973735 | 5 Pkt/10m | 0 Pkt/10m | 4.16 Volt | 4 Volt | -0.14 Ampere |
| 1792972531 | 3 Pkt/10m | 0 Pkt/10m | 4.21 Volt | 4 Volt | -0.07 Ampere |
| 1792971327 | 5 Pkt/10m | 0 Pkt/10m | 4.33 Volt | 4.1 Volt | 0.12 Ampere |
| 1792970123 | 4 Pkt/10m | 0 Pkt/10m | 4.21 Volt | 4 Volt | -0.07 Ampere |
| 1792968919 | 7 Pkt/10m | 0 Pkt/10m | 4.14 Volt | 3.9 Volt | -0.14 Ampere |
| 1792967715 | 6 Pkt/10m | 0 Pkt/10m | 4.14 Volt | 4 Volt | -0.15 Ampere |
| 1792966511 | 4 Pkt/10m | 0 Pkt/10m | 4.33 Volt | 4.1 Volt | 0.11 Ampere |
| 1792965307 | 7 Pkt/10m | 0 Pkt/10m | 4.21 Volt | 4 Volt | -0.07 Ampere |
| 1792964103 | 2 Pkt/10m | 0 Pkt/10m | 4.31 Volt | 4.1 Volt | 0.12 Ampere |
| 1792962899 | 5 Pkt/10m | 0 Pkt/10m | 4.21 Volt | 4 Volt | -0.07 Ampere |
| 1792961695 | 6 Pkt/10m | 0 Pkt/10m | 4.31 Volt | 4.1 Volt | 0.11 Ampere |
| 1792960491 | 3 Pkt/10m | 0 Pkt/10m | 4.19 Volt | 4 Volt | -0.07 Ampere |
| 1792959287 | 4 Pkt/10m | 0 Pkt/10m | 4.14 Volt | 3.9 Volt | -0.14 Ampere |
| 1792958082 | 3 Pkt/10m | 0 Pkt/10m | 4.19 Volt | 4 Volt | -0.07 Ampere |
| 1792956878 | 4 Pkt/10m | 0 Pkt/10m | 4.19 Volt | 4 Volt | -0.07 Ampere |
| 1792955674 | 5 Pkt/10m | 0 Pkt/10m | 4.19 Volt | 4 Volt | -0.07 Ampere |
| 1792954470 | 3 Pkt/10m | 0 Pkt/10m | 4.33 Volt | 4.1 Volt | 0.13 Ampere |
| 1792953266 | 3 Pkt/10m | 0 Pkt/10m | 4.19 Volt | 4 Volt | -0.07 Ampere |
| 1792952062 | 3 Pkt/10m | 0 Pkt/10m | 4.19 Volt | 4 Volt | -0.07 Ampere |
| 1792950858 | 1 Pkt/10m | 0 Pkt/10m | 4.19 Volt | 4 Volt | -0.07 Ampere |
| 1792949654 | 5 Pkt/10m | 0 Pkt/10m | 4.14 Volt | 3.9 Volt | -0.15 Ampere |
| 1792948450 | 5 Pkt/10m | 0 Pkt/10m | 4.19 Volt | 4 Volt | -0.08 Ampere |
| 1792947246 | 2 Pkt/10m | 0 Pkt/10m | 4.31 Volt | 4.1 Volt | 0.12 Ampere |
*Used Equation Coefficients:
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Volt Aux: 0, 0.1, 0
Ampere Aux: 0, 0.01, -1.27
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)