This is the latest recevied telemetry packets stored in our database for station/object IU2RPR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkt* | TxPkt* | Batt* | Volt Aux* | Ampere Aux* |
|---|---|---|---|---|---|
| 1757894349 | 37 Pkt/10m | 28 Pkt/10m | 3.88 Volt | 3.9 Volt | 0.02 Ampere |
| 1757893148 | 40 Pkt/10m | 27 Pkt/10m | 3.88 Volt | 3.9 Volt | 0.03 Ampere |
| 1757891947 | 41 Pkt/10m | 26 Pkt/10m | 3.88 Volt | 3.9 Volt | 0.03 Ampere |
| 1757890745 | 41 Pkt/10m | 28 Pkt/10m | 3.86 Volt | 3.9 Volt | 0.02 Ampere |
| 1757889544 | 40 Pkt/10m | 31 Pkt/10m | 3.88 Volt | 3.9 Volt | 0.02 Ampere |
| 1757888343 | 44 Pkt/10m | 31 Pkt/10m | 3.86 Volt | 3.8 Volt | -0.1 Ampere |
| 1757887141 | 45 Pkt/10m | 31 Pkt/10m | 3.88 Volt | 3.9 Volt | 0.02 Ampere |
| 1757885940 | 46 Pkt/10m | 31 Pkt/10m | 3.82 Volt | 3.9 Volt | -0.02 Ampere |
| 1757884739 | 45 Pkt/10m | 31 Pkt/10m | 3.88 Volt | 3.9 Volt | 0.03 Ampere |
| 1757883537 | 42 Pkt/10m | 30 Pkt/10m | 3.88 Volt | 3.9 Volt | 0.02 Ampere |
| 1757882336 | 44 Pkt/10m | 28 Pkt/10m | 3.88 Volt | 3.9 Volt | 0.02 Ampere |
| 1757881135 | 51 Pkt/10m | 40 Pkt/10m | 3.88 Volt | 3.9 Volt | 0.02 Ampere |
| 1757879934 | 36 Pkt/10m | 22 Pkt/10m | 3.86 Volt | 3.9 Volt | -0.05 Ampere |
| 1757878732 | 48 Pkt/10m | 29 Pkt/10m | 3.88 Volt | 3.9 Volt | 0.02 Ampere |
| 1757877531 | 45 Pkt/10m | 32 Pkt/10m | 3.88 Volt | 3.9 Volt | 0.02 Ampere |
| 1757876330 | 42 Pkt/10m | 24 Pkt/10m | 3.88 Volt | 3.9 Volt | 0.03 Ampere |
| 1757875129 | 45 Pkt/10m | 28 Pkt/10m | 3.88 Volt | 3.9 Volt | 0.02 Ampere |
| 1757873927 | 41 Pkt/10m | 31 Pkt/10m | 3.86 Volt | 3.9 Volt | 0.02 Ampere |
| 1757872726 | 43 Pkt/10m | 25 Pkt/10m | 3.82 Volt | 3.9 Volt | -0.02 Ampere |
| 1757871525 | 47 Pkt/10m | 30 Pkt/10m | 3.86 Volt | 3.9 Volt | 0.01 Ampere |
| 1757870324 | 54 Pkt/10m | 38 Pkt/10m | 3.84 Volt | 3.9 Volt | -0.04 Ampere |
| 1757869122 | 36 Pkt/10m | 26 Pkt/10m | 3.88 Volt | 3.9 Volt | 0.01 Ampere |
| 1757867921 | 43 Pkt/10m | 34 Pkt/10m | 3.82 Volt | 3.9 Volt | -0.06 Ampere |
| 1757866720 | 53 Pkt/10m | 39 Pkt/10m | 3.84 Volt | 3.9 Volt | 0 Ampere |
| 1757865519 | 0 Pkt/10m | 0 Pkt/10m | 3.82 Volt | 3.9 Volt | -0.06 Ampere |
*Used Equation Coefficients:
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Volt Aux: 0, 0.1, 0
Ampere Aux: 0, 0.01, -1.27
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)