This is the latest recevied telemetry packets stored in our database for station/object OM7DD-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1785498116 | 3.97 VDC | 32.7 C | 1020.75 hPa | 0 | 0 |
| 1785494463 | 4.01 VDC | 32.4 C | 1020.63 hPa | 0 | 0 |
| 1785492579 | 4.02 VDC | 35.4 C | 1019.5 hPa | 0 | 0 |
| 1785487937 | 4.05 VDC | 36.4 C | 1023.38 hPa | 0 | 0 |
| 1785479269 | 4.08 VDC | 32.9 C | 1023.25 hPa | 0 | 0 |
| 1785477206 | 4.09 VDC | 30.5 C | 1023.75 hPa | 0 | 0 |
| 1785474463 | 4.11 VDC | 26.7 C | 1024.88 hPa | 0 | 0 |
| 1785472945 | 4.13 VDC | 25 C | 1032.63 hPa | 0 | 0 |
| 1785471863 | 4.16 VDC | 24.6 C | 985.13 hPa | 0 | 0 |
| 1785470580 | 3.44 VDC | 18.9 C | 1023.88 hPa | 0 | 0 |
| 1785467943 | 3.48 VDC | 16 C | 1028.5 hPa | 0 | 0 |
| 1785462083 | 3.52 VDC | 17.4 C | 1024.75 hPa | 0 | 0 |
| 1785459479 | 3.54 VDC | 17.8 C | 1021.25 hPa | 0 | 0 |
| 1785454121 | 3.6 VDC | 18.9 C | 1024.88 hPa | 0 | 0 |
| 1785452119 | 3.62 VDC | 19.2 C | 1024.25 hPa | 0 | 0 |
| 1785449541 | 3.65 VDC | 20 C | 1029.38 hPa | 0 | 0 |
| 1785447905 | 3.66 VDC | 20.5 C | 1023.88 hPa | 0 | 0 |
| 1785446220 | 3.68 VDC | 21.2 C | 1025 hPa | 0 | 0 |
| 1785443146 | 3.7 VDC | 22.3 C | 1022.75 hPa | 0 | 0 |
| 1785441964 | 3.71 VDC | 22.6 C | 1028.75 hPa | 0 | 0 |
| 1785438830 | 3.74 VDC | 24.4 C | 1024.38 hPa | 0 | 0 |
| 1785436622 | 3.76 VDC | 25.8 C | 1023.88 hPa | 0 | 0 |
| 1785431117 | 3.8 VDC | 30.5 C | 1021.25 hPa | 0 | 0 |
| 1785425883 | 3.83 VDC | 30.7 C | 1018.5 hPa | 0 | 0 |
| 1785422215 | 3.86 VDC | 31.2 C | 1022.75 hPa | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)