This is the latest recevied telemetry packets stored in our database for station/object SP2RO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789237238 | 5 Count | 507 Count | 2 Count | 2.47 VDC | 0 VDC |
| 1789236337 | 4 Count | 376 Count | 2 Count | 2.41 VDC | 0 VDC |
| 1789235437 | 2 Count | 259 Count | 1 Count | 2.43 VDC | 0 VDC |
| 1789234536 | 1 Count | 131 Count | 1 Count | 2.57 VDC | 0 VDC |
| 1789233635 | 13 Count | 1036 Count | 5 Count | 2.61 VDC | 0 VDC |
| 1789232734 | 12 Count | 900 Count | 5 Count | 2.8 VDC | 0 VDC |
| 1789231833 | 10 Count | 773 Count | 4 Count | 2.64 VDC | 0 VDC |
| 1789230932 | 9 Count | 677 Count | 4 Count | 2.73 VDC | 0 VDC |
| 1789230031 | 7 Count | 573 Count | 3 Count | 2.82 VDC | 0 VDC |
| 1789229131 | 6 Count | 466 Count | 3 Count | 2.87 VDC | 0 VDC |
| 1789228230 | 3 Count | 351 Count | 1 Count | 2.91 VDC | 0 VDC |
| 1789227329 | 2 Count | 234 Count | 1 Count | 2.9 VDC | 0 VDC |
| 1789226428 | 0 Count | 124 Count | 0 Count | 3.03 VDC | 0 VDC |
| 1789225527 | 16 Count | 1012 Count | 8 Count | 2.97 VDC | 0 VDC |
| 1789224626 | 14 Count | 898 Count | 7 Count | 2.98 VDC | 0 VDC |
| 1789223726 | 13 Count | 803 Count | 7 Count | 3.05 VDC | 0 VDC |
| 1789222825 | 11 Count | 676 Count | 6 Count | 3.02 VDC | 0 VDC |
| 1789221924 | 10 Count | 560 Count | 6 Count | 3.13 VDC | 0 VDC |
| 1789221023 | 8 Count | 449 Count | 5 Count | 3.08 VDC | 0 VDC |
| 1789220123 | 7 Count | 327 Count | 5 Count | 3.14 VDC | 0 VDC |
| 1789219222 | 2 Count | 215 Count | 1 Count | 3.12 VDC | 0 VDC |
| 1789218321 | 1 Count | 112 Count | 1 Count | 3.1 VDC | 0 VDC |
| 1789217420 | 18 Count | 1053 Count | 5 Count | 3.32 VDC | 0 VDC |
| 1789216519 | 17 Count | 935 Count | 5 Count | 3.2 VDC | 0 VDC |
| 1789215618 | 15 Count | 820 Count | 4 Count | 3.19 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)