This is the latest recevied telemetry packets stored in our database for station/object SP2HCA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785097542 | 148 Count | 807 Count | 120 Count | 4 VDC | 0.08 VDC |
| 1785096041 | 137 Count | 766 Count | 111 Count | 4 VDC | 0.08 VDC |
| 1785095461 | 126 Count | 747 Count | 104 Count | 4 VDC | 0.08 VDC |
| 1785093960 | 116 Count | 704 Count | 95 Count | 4 VDC | 0.08 VDC |
| 1785092458 | 109 Count | 666 Count | 89 Count | 4 VDC | 0.08 VDC |
| 1785090957 | 102 Count | 630 Count | 83 Count | 4.01 VDC | 0.08 VDC |
| 1785089455 | 94 Count | 589 Count | 76 Count | 4.01 VDC | 0.08 VDC |
| 1785087954 | 88 Count | 553 Count | 71 Count | 4.01 VDC | 0.08 VDC |
| 1785086453 | 81 Count | 512 Count | 65 Count | 4.01 VDC | 0.08 VDC |
| 1785084951 | 69 Count | 463 Count | 54 Count | 4.01 VDC | 0.08 VDC |
| 1785083449 | 64 Count | 415 Count | 50 Count | 4.02 VDC | 0.08 VDC |
| 1785081948 | 60 Count | 382 Count | 47 Count | 4.02 VDC | 0.08 VDC |
| 1785080447 | 53 Count | 342 Count | 41 Count | 4.02 VDC | 0.08 VDC |
| 1785078945 | 44 Count | 308 Count | 33 Count | 4.01 VDC | 0.08 VDC |
| 1785077444 | 38 Count | 281 Count | 28 Count | 4.02 VDC | 0.08 VDC |
| 1785075942 | 32 Count | 242 Count | 23 Count | 4.01 VDC | 0.08 VDC |
| 1785074441 | 28 Count | 177 Count | 20 Count | 4.02 VDC | 0.08 VDC |
| 1785073858 | 20 Count | 144 Count | 17 Count | 4.02 VDC | 0.08 VDC |
| 1785072357 | 13 Count | 97 Count | 11 Count | 4.02 VDC | 0.08 VDC |
| 1785070856 | 9 Count | 64 Count | 8 Count | 4.02 VDC | 0.08 VDC |
| 1785069354 | 5 Count | 34 Count | 5 Count | 4.02 VDC | 0.08 VDC |
| 1785067853 | 110 Count | 1017 Count | 87 Count | 4.02 VDC | 0.08 VDC |
| 1785066351 | 104 Count | 981 Count | 82 Count | 4.02 VDC | 0.08 VDC |
| 1785064850 | 98 Count | 944 Count | 77 Count | 4.02 VDC | 0.08 VDC |
| 1785063349 | 91 Count | 907 Count | 71 Count | 4.03 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)