EA2RCF LoRa APRS MAP

My position About Go to BACKUP map Powered by EA2RCF Radioclub Foronda ☰

reset

SP2RO-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP2RO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*
1751755526	15 Count	49 Count	3 Count	2.45 VDC
1751754625	14 Count	46 Count	3 Count	2.6 VDC
1751753724	10 Count	26 Count	0 Count	2.67 VDC
1751752823	8 Count	16 Count	0 Count	2.5 VDC
1751751922	7 Count	14 Count	0 Count	2.61 VDC
1751751021	6 Count	14 Count	0 Count	2.59 VDC
1751750120	5 Count	13 Count	0 Count	2.43 VDC
1751749220	4 Count	11 Count	0 Count	2.57 VDC
1751748319	3 Count	10 Count	0 Count	2.58 VDC
1751747418	2 Count	10 Count	0 Count	2.63 VDC
1751746517	1 Count	8 Count	0 Count	2.48 VDC
1751745617	0 Count	5 Count	0 Count	2.51 VDC
1751744716	133 Count	1013 Count	96 Count	2.54 VDC
1751743815	130 Count	979 Count	94 Count	2.79 VDC
1751742914	129 Count	978 Count	94 Count	2.52 VDC
1751742013	128 Count	977 Count	94 Count	2.65 VDC
1751741113	127 Count	977 Count	94 Count	2.72 VDC
1751740212	126 Count	976 Count	94 Count	2.67 VDC
1751739311	125 Count	971 Count	94 Count	2.7 VDC
1751738411	124 Count	969 Count	94 Count	2.66 VDC
1751737510	123 Count	967 Count	94 Count	2.7 VDC
1751736609	122 Count	964 Count	94 Count	2.59 VDC
1751735708	120 Count	952 Count	93 Count	2.7 VDC
1751734807	115 Count	935 Count	89 Count	2.82 VDC
1751733907	109 Count	897 Count	84 Count	2.74 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)