This is the latest recevied telemetry packets stored in our database for station/object SP2RO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1764006176 | 104 Count | 1039 Count | 86 Count | 1.49 VDC | 0 VDC |
| 1764005276 | 103 Count | 998 Count | 86 Count | 1.25 VDC | 0 VDC |
| 1764004375 | 98 Count | 939 Count | 82 Count | 1.41 VDC | 0 VDC |
| 1764003473 | 90 Count | 884 Count | 75 Count | 1.29 VDC | 0 VDC |
| 1764002572 | 89 Count | 844 Count | 75 Count | 1.23 VDC | 0 VDC |
| 1764001672 | 88 Count | 795 Count | 75 Count | 1.25 VDC | 0 VDC |
| 1764000771 | 85 Count | 747 Count | 73 Count | 1.45 VDC | 0 VDC |
| 1763999870 | 63 Count | 639 Count | 52 Count | 1.41 VDC | 0 VDC |
| 1763998969 | 35 Count | 514 Count | 25 Count | 1.47 VDC | 0 VDC |
| 1763998069 | 26 Count | 447 Count | 17 Count | 1.49 VDC | 0 VDC |
| 1763997168 | 25 Count | 409 Count | 17 Count | 1.33 VDC | 0 VDC |
| 1763996267 | 24 Count | 374 Count | 17 Count | 1.3 VDC | 0 VDC |
| 1763995366 | 23 Count | 341 Count | 17 Count | 1.46 VDC | 0 VDC |
| 1763994466 | 22 Count | 304 Count | 17 Count | 1.23 VDC | 0 VDC |
| 1763993565 | 21 Count | 265 Count | 17 Count | 1.31 VDC | 0 VDC |
| 1763992664 | 20 Count | 226 Count | 17 Count | 1.45 VDC | 0 VDC |
| 1763991763 | 8 Count | 158 Count | 6 Count | 1.39 VDC | 0 VDC |
| 1763990862 | 6 Count | 123 Count | 5 Count | 1.43 VDC | 0 VDC |
| 1763989962 | 2 Count | 58 Count | 2 Count | 1.44 VDC | 0 VDC |
| 1763989061 | 128 Count | 1017 Count | 109 Count | 1.27 VDC | 0 VDC |
| 1763988160 | 127 Count | 982 Count | 109 Count | 1.33 VDC | 0 VDC |
| 1763987259 | 122 Count | 923 Count | 105 Count | 1.54 VDC | 0 VDC |
| 1763986358 | 97 Count | 846 Count | 81 Count | 1.36 VDC | 0 VDC |
| 1763985458 | 93 Count | 800 Count | 78 Count | 1.35 VDC | 0 VDC |
| 1763984557 | 92 Count | 766 Count | 78 Count | 1.43 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)