This is the latest recevied telemetry packets stored in our database for station/object IU6UHH-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1757095113 | 3.71 VDC | 0 | 0 | 0 | 0 |
| 1757095060 | 3.69 VDC | 0 | 0 | 0 | 0 |
| 1757094543 | 3.69 VDC | 0 | 0 | 0 | 0 |
| 1757093640 | 3.68 VDC | 0 | 0 | 0 | 0 |
| 1757093617 | 3.72 VDC | 0 | 0 | 0 | 0 |
| 1757093601 | 3.72 VDC | 0 | 0 | 0 | 0 |
| 1757092000 | 3.74 VDC | 0 | 0 | 0 | 0 |
| 1757091986 | 3.74 VDC | 0 | 0 | 0 | 0 |
| 1757091971 | 3.74 VDC | 0 | 0 | 0 | 0 |
| 1757091956 | 3.74 VDC | 0 | 0 | 0 | 0 |
| 1757091926 | 3.74 VDC | 0 | 0 | 0 | 0 |
| 1757091904 | 3.73 VDC | 0 | 0 | 0 | 0 |
| 1757091879 | 3.73 VDC | 0 | 0 | 0 | 0 |
| 1757090328 | 3.74 VDC | 0 | 0 | 0 | 0 |
| 1757053267 | 3.91 VDC | 0 | 0 | 0 | 0 |
| 1757053240 | 3.91 VDC | 0 | 0 | 0 | 0 |
| 1757052847 | 3.89 VDC | 0 | 0 | 0 | 0 |
| 1757052706 | 3.91 VDC | 0 | 0 | 0 | 0 |
| 1757051579 | 3.95 VDC | 0 | 0 | 0 | 0 |
| 1757051563 | 3.94 VDC | 0 | 0 | 0 | 0 |
| 1757051510 | 3.93 VDC | 0 | 0 | 0 | 0 |
| 1757051480 | 3.92 VDC | 0 | 0 | 0 | 0 |
| 1757051435 | 3.92 VDC | 0 | 0 | 0 | 0 |
| 1757051418 | 3.92 VDC | 0 | 0 | 0 | 0 |
| 1757051404 | 3.93 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)