This is the latest recevied telemetry packets stored in our database for station/object 9M2SWI-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1751626974 | 3.66 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1751626072 | 3.67 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1751625173 | 3.68 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1751624270 | 3.68 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1751623368 | 3.69 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1751622467 | 3.7 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1751621565 | 3.72 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1751620664 | 3.72 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1751619762 | 3.74 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1751618861 | 3.74 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1751617959 | 3.77 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1751617058 | 3.77 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1751616156 | 3.79 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1751615254 | 3.81 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1751614353 | 3.83 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1751613451 | 3.85 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1751612549 | 3.86 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1751611648 | 3.89 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1751610746 | 3.91 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1751609845 | 3.92 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1751608943 | 3.94 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1751608042 | 3.96 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1751607140 | 3.98 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1751606239 | 4 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1751605338 | 4.03 VDC | 0.54 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)