This is the latest recevied telemetry packets stored in our database for station/object LZ1GSP-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1750130847 | 2.93 | 0 | 0 | 0 | 0 |
| 1750129944 | 3.23 | 0 | 0 | 0 | 0 |
| 1750129041 | 3.42 | 0 | 0 | 0 | 0 |
| 1750128138 | 3.53 | 0 | 0 | 0 | 0 |
| 1750127236 | 3.6 | 0 | 0 | 0 | 0 |
| 1750126332 | 3.63 | 0 | 0 | 0 | 0 |
| 1750125429 | 3.65 | 0 | 0 | 0 | 0 |
| 1750124526 | 3.66 | 0 | 0 | 0 | 0 |
| 1750123623 | 3.67 | 0 | 0 | 0 | 0 |
| 1750122720 | 3.68 | 0 | 0 | 0 | 0 |
| 1750121817 | 3.69 | 0 | 0 | 0 | 0 |
| 1750120914 | 3.7 | 0 | 0 | 0 | 0 |
| 1750120011 | 3.71 | 0 | 0 | 0 | 0 |
| 1750119108 | 3.72 | 0 | 0 | 0 | 0 |
| 1750118205 | 3.73 | 0 | 0 | 0 | 0 |
| 1750117302 | 3.74 | 0 | 0 | 0 | 0 |
| 1750116399 | 3.74 | 0 | 0 | 0 | 0 |
| 1750115497 | 3.76 | 0 | 0 | 0 | 0 |
| 1750114593 | 3.76 | 0 | 0 | 0 | 0 |
| 1750113690 | 3.77 | 0 | 0 | 0 | 0 |
| 1750112787 | 3.77 | 0 | 0 | 0 | 0 |
| 1750111884 | 3.78 | 0 | 0 | 0 | 0 |
| 1750110981 | 3.78 | 0 | 0 | 0 | 0 |
| 1750110084 | 3.79 | 0 | 0 | 0 | 0 |
| 1750109176 | 3.79 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)