This is the latest recevied telemetry packets stored in our database for station/object YO3JAZ-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1746826001 | 3.84 VDC | 3.84 VDC | 0 | 0 | 0 |
| 1746825102 | 3.84 VDC | 3.84 VDC | 0 | 0 | 0 |
| 1746824202 | 3.84 VDC | 3.84 VDC | 0 | 0 | 0 |
| 1746823303 | 3.85 VDC | 3.84 VDC | 0 | 0 | 0 |
| 1746822403 | 3.85 VDC | 3.84 VDC | 0 | 0 | 0 |
| 1746821504 | 3.86 VDC | 3.86 VDC | 0 | 0 | 0 |
| 1746820605 | 3.86 VDC | 3.86 VDC | 0 | 0 | 0 |
| 1746819707 | 3.86 VDC | 3.86 VDC | 0 | 0 | 0 |
| 1746818806 | 3.86 VDC | 3.86 VDC | 0 | 0 | 0 |
| 1746817008 | 3.86 VDC | 3.86 VDC | 0 | 0 | 0 |
| 1746813411 | 3.88 VDC | 3.88 VDC | 0 | 0 | 0 |
| 1746811611 | 3.88 VDC | 3.88 VDC | 0 | 0 | 0 |
| 1746810711 | 3.88 VDC | 3.88 VDC | 0 | 0 | 0 |
| 1746809811 | 3.88 VDC | 3.88 VDC | 0 | 0 | 0 |
| 1746808913 | 3.89 VDC | 3.88 VDC | 0 | 0 | 0 |
| 1746808014 | 3.89 VDC | 3.88 VDC | 0 | 0 | 0 |
| 1746807115 | 3.89 VDC | 3.88 VDC | 0 | 0 | 0 |
| 1746806214 | 3.89 VDC | 3.88 VDC | 0 | 0 | 0 |
| 1746805314 | 3.89 VDC | 3.88 VDC | 0 | 0 | 0 |
| 1746804415 | 3.89 VDC | 3.88 VDC | 0 | 0 | 0 |
| 1746803515 | 3.9 VDC | 3.9 VDC | 0 | 0 | 0 |
| 1746802615 | 3.91 VDC | 3.9 VDC | 0 | 0 | 0 |
| 1746801716 | 3.91 VDC | 3.9 VDC | 0 | 0 | 0 |
| 1746800815 | 3.91 VDC | 3.9 VDC | 0 | 0 | 0 |
| 1746799917 | 3.91 VDC | 3.9 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)