This is the latest recevied telemetry packets stored in our database for station/object EA4IHO-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1746803313 | 4.41 VDC | 0 | 0 | 0 | 0 |
| 1746802410 | 4.42 VDC | 0 | 0 | 0 | 0 |
| 1746801507 | 4.42 VDC | 0 | 0 | 0 | 0 |
| 1746800604 | 4.42 VDC | 0 | 0 | 0 | 0 |
| 1746799701 | 4.42 VDC | 0 | 0 | 0 | 0 |
| 1746798798 | 4.42 VDC | 0 | 0 | 0 | 0 |
| 1746797895 | 4.42 VDC | 0 | 0 | 0 | 0 |
| 1746796992 | 4.43 VDC | 0 | 0 | 0 | 0 |
| 1746796089 | 4.43 VDC | 0 | 0 | 0 | 0 |
| 1746795186 | 4.43 VDC | 0 | 0 | 0 | 0 |
| 1746794283 | 4.44 VDC | 0 | 0 | 0 | 0 |
| 1746793380 | 4.44 VDC | 0 | 0 | 0 | 0 |
| 1746792477 | 4.44 VDC | 0 | 0 | 0 | 0 |
| 1746791574 | 4.45 VDC | 0 | 0 | 0 | 0 |
| 1746790671 | 4.45 VDC | 0 | 0 | 0 | 0 |
| 1746789768 | 4.46 VDC | 0 | 0 | 0 | 0 |
| 1746788865 | 4.47 VDC | 0 | 0 | 0 | 0 |
| 1746787962 | 4.48 VDC | 0 | 0 | 0 | 0 |
| 1746787059 | 4.48 VDC | 0 | 0 | 0 | 0 |
| 1746786156 | 4.49 VDC | 0 | 0 | 0 | 0 |
| 1746785253 | 4.5 VDC | 0 | 0 | 0 | 0 |
| 1746784350 | 4.52 VDC | 0 | 0 | 0 | 0 |
| 1746783447 | 4.53 VDC | 0 | 0 | 0 | 0 |
| 1746782544 | 4.54 VDC | 0 | 0 | 0 | 0 |
| 1746781641 | 4.56 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)