This is the latest recevied telemetry packets stored in our database for station/object YC0TBU-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | SAT NUM* | HDOP* | TEMP* | HUMIDITY* | PRESSURE* |
|---|---|---|---|---|---|
| 1738377879 | 4 SAT | 9 DOP | 37 C | 40 % | 1005 mBAR |
| 1738377847 | 4 SAT | 9 DOP | 37 C | 40 % | 1005 mBAR |
| 1738377785 | 4 SAT | 8 DOP | 37 C | 40 % | 1005 mBAR |
| 1738377724 | 4 SAT | 8 DOP | 37 C | 40 % | 1005 mBAR |
| 1738377662 | 4 SAT | 8 DOP | 37 C | 40 % | 1005 mBAR |
| 1738377601 | 4 SAT | 7 DOP | 37 C | 41 % | 1005 mBAR |
| 1738377539 | 4 SAT | 7 DOP | 37 C | 40 % | 1005 mBAR |
| 1738377416 | 4 SAT | 6 DOP | 37 C | 40 % | 1005 mBAR |
| 1738377354 | 4 SAT | 6 DOP | 37 C | 40 % | 1005 mBAR |
| 1738377293 | 4 SAT | 3 DOP | 37 C | 40 % | 1005 mBAR |
| 1738377213 | 5 SAT | 2 DOP | 37 C | 40 % | 1005 mBAR |
| 1738377090 | 5 SAT | 2 DOP | 37 C | 40 % | 1005 mBAR |
| 1738376782 | 4 SAT | 5 DOP | 37 C | 40 % | 1005 mBAR |
| 1738376746 | 4 SAT | 5 DOP | 37 C | 41 % | 1005 mBAR |
| 1738376684 | 4 SAT | 4 DOP | 37 C | 41 % | 1005 mBAR |
| 1738376622 | 5 SAT | 2 DOP | 37 C | 41 % | 1005 mBAR |
| 1738376561 | 5 SAT | 2 DOP | 37 C | 41 % | 1005 mBAR |
| 1738376499 | 5 SAT | 2 DOP | 37 C | 41 % | 1005 mBAR |
| 1738376437 | 5 SAT | 2 DOP | 37 C | 41 % | 1005 mBAR |
| 1738376376 | 5 SAT | 2 DOP | 37 C | 41 % | 1005 mBAR |
| 1738376314 | 5 SAT | 2 DOP | 37 C | 41 % | 1005 mBAR |
| 1738376130 | 5 SAT | 1 DOP | 37 C | 41 % | 1005 mBAR |
| 1738376068 | 5 SAT | 2 DOP | 37 C | 41 % | 1005 mBAR |
| 1738376006 | 4 SAT | 4 DOP | 37 C | 41 % | 1005 mBAR |
| 1738375939 | 6 SAT | 4 DOP | 37 C | 41 % | 1005 mBAR |
*Used Equation Coefficients:
SAT NUM: 0, 1, 0
HDOP: 0, 1, 0
TEMP: 0, 1, 0
HUMIDITY: 0, 1, 0
PRESSURE: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)