This is the latest recevied telemetry packets stored in our database for station/object SR9BBC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1767308718 | 3 Count | 82 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1767307817 | 1 Count | 37 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1767306916 | 59 Count | 1033 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1767306015 | 57 Count | 992 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1767305113 | 56 Count | 967 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1767304212 | 54 Count | 930 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1767303312 | 52 Count | 896 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1767302411 | 49 Count | 851 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1767301510 | 46 Count | 824 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1767300608 | 44 Count | 744 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1767299707 | 42 Count | 689 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1767298806 | 40 Count | 652 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1767297905 | 38 Count | 627 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1767297004 | 35 Count | 592 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1767296103 | 33 Count | 561 Count | 0 Count | 4.08 VDC | 0 VDC |
| 1767295202 | 31 Count | 527 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1767294301 | 29 Count | 466 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1767293400 | 26 Count | 387 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1767292499 | 24 Count | 353 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1767291598 | 22 Count | 319 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1767290698 | 20 Count | 292 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1767289797 | 18 Count | 256 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1767288896 | 15 Count | 227 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1767287995 | 13 Count | 186 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1767287093 | 11 Count | 161 Count | 0 Count | 4.1 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)