This is the latest recevied telemetry packets stored in our database for station/object YC0TBU-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TemperaturHumidity* | Humidity* | Pressure* | SAT* | HDOP* |
|---|---|---|---|---|---|
| 1738279680 | 35 °C | 49 % | 1005 mBar | 7 | 1 |
| 1738279560 | 35 °C | 49 % | 1005 mBar | 7 | 1 |
| 1738279440 | 35 °C | 49 % | 1005 mBar | 10 | 0 |
| 1738279320 | 35 °C | 49 % | 1005 mBar | 9 | 1 |
| 1738279200 | 35 °C | 48 % | 1005 mBar | 6 | 1 |
| 1738279080 | 35 °C | 49 % | 1004 mBar | 8 | 1 |
| 1738278960 | 35 °C | 49 % | 1004 mBar | 7 | 1 |
| 1738278840 | 35 °C | 49 % | 1004 mBar | 7 | 1 |
| 1738278720 | 35 °C | 49 % | 1004 mBar | 8 | 1 |
| 1738278600 | 35 °C | 49 % | 1004 mBar | 9 | 1 |
| 1738278480 | 35 °C | 49 % | 1004 mBar | 9 | 1 |
| 1738278360 | 35 °C | 49 % | 1004 mBar | 10 | 1 |
| 1738278240 | 35 °C | 49 % | 1004 mBar | 8 | 1 |
| 1738278120 | 35 °C | 49 % | 1004 mBar | 8 | 1 |
| 1738278000 | 35 °C | 49 % | 1004 mBar | 8 | 1 |
| 1738277880 | 35 °C | 49 % | 1004 mBar | 8 | 1 |
| 1738277760 | 35 °C | 49 % | 1004 mBar | 8 | 1 |
| 1738277640 | 35 °C | 49 % | 1004 mBar | 7 | 1 |
| 1738277520 | 35 °C | 49 % | 1004 mBar | 6 | 1 |
| 1738277400 | 35 °C | 49 % | 1004 mBar | 9 | 1 |
| 1738277389 | 35 °C | 49 % | 1004 mBar | 10 | 1 |
| 1738277261 | 35 °C | 49 % | 1004 mBar | 7 | 1 |
| 1738277141 | 35 °C | 49 % | 1004 mBar | 7 | 1 |
| 1738277021 | 35 °C | 49 % | 1004 mBar | 9 | 0 |
| 1738276901 | 35 °C | 49 % | 1004 mBar | 9 | 1 |
*Used Equation Coefficients:
TemperaturHumidity: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
SAT: 0, 1, 0
HDOP: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)