This is the latest recevied telemetry packets stored in our database for station/object SP5BWN-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782632590 | 137 Count | 908 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782630787 | 136 Count | 903 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782628983 | 134 Count | 864 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782627176 | 129 Count | 809 Count | 0 Count | 4.05 VDC | 0.14 VDC |
| 1782625374 | 125 Count | 771 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782623570 | 123 Count | 704 Count | 0 Count | 4.01 VDC | 0.14 VDC |
| 1782621768 | 120 Count | 645 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782619968 | 117 Count | 620 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782618162 | 116 Count | 602 Count | 0 Count | 4.01 VDC | 0.14 VDC |
| 1782616362 | 115 Count | 600 Count | 0 Count | 4.01 VDC | 0.14 VDC |
| 1782614556 | 114 Count | 598 Count | 0 Count | 4.05 VDC | 0.14 VDC |
| 1782612753 | 113 Count | 597 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782605541 | 109 Count | 596 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782603739 | 106 Count | 596 Count | 0 Count | 4.01 VDC | 0.14 VDC |
| 1782601935 | 104 Count | 587 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782600132 | 103 Count | 571 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782598329 | 102 Count | 556 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782596527 | 101 Count | 540 Count | 0 Count | 4.01 VDC | 0.14 VDC |
| 1782594723 | 100 Count | 518 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782592920 | 99 Count | 497 Count | 0 Count | 4.01 VDC | 0.14 VDC |
| 1782591117 | 96 Count | 484 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782589314 | 95 Count | 474 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782587515 | 94 Count | 458 Count | 0 Count | 4.01 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)