This is the latest recevied telemetry packets stored in our database for station/object CR7BQX-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773668019 | 481 Count | 211 Count | 211 Count | 4.22 VDC | 0.14 VDC |
| 1773666213 | 477 Count | 209 Count | 209 Count | 4.14 VDC | 0.14 VDC |
| 1773664408 | 473 Count | 207 Count | 207 Count | 4.21 VDC | 0.14 VDC |
| 1773662602 | 469 Count | 205 Count | 205 Count | 4.18 VDC | 0.14 VDC |
| 1773660796 | 465 Count | 203 Count | 203 Count | 4.2 VDC | 0.14 VDC |
| 1773658991 | 461 Count | 201 Count | 201 Count | 4.25 VDC | 0.14 VDC |
| 1773608877 | 454 Count | 200 Count | 200 Count | 4.16 VDC | 0.14 VDC |
| 1773607070 | 450 Count | 198 Count | 198 Count | 4.23 VDC | 0.14 VDC |
| 1773605264 | 446 Count | 196 Count | 196 Count | 4.15 VDC | 0.14 VDC |
| 1773603459 | 442 Count | 194 Count | 194 Count | 4.23 VDC | 0.14 VDC |
| 1773601653 | 438 Count | 192 Count | 192 Count | 4.2 VDC | 0.14 VDC |
| 1773599847 | 434 Count | 190 Count | 190 Count | 4.13 VDC | 0.14 VDC |
| 1773598034 | 430 Count | 188 Count | 188 Count | 4.15 VDC | 0.14 VDC |
| 1773596229 | 426 Count | 186 Count | 186 Count | 4.13 VDC | 0.14 VDC |
| 1773594423 | 422 Count | 184 Count | 184 Count | 4.16 VDC | 0.14 VDC |
| 1773592686 | 414 Count | 182 Count | 182 Count | 4.15 VDC | 0.14 VDC |
| 1773590881 | 410 Count | 180 Count | 180 Count | 4.17 VDC | 0.14 VDC |
| 1773589075 | 406 Count | 178 Count | 178 Count | 4.2 VDC | 0.14 VDC |
| 1773587269 | 402 Count | 176 Count | 176 Count | 4.15 VDC | 0.14 VDC |
| 1773585463 | 398 Count | 174 Count | 174 Count | 4.19 VDC | 0.14 VDC |
| 1773583658 | 394 Count | 172 Count | 172 Count | 4.21 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)