This is the latest recevied telemetry packets stored in our database for station/object OM4MM-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1757864735 | 3.21 VDC | 0 | 0 | 0 | 0 |
| 1757864713 | 3.18 VDC | 0 | 0 | 0 | 0 |
| 1757864693 | 3.18 VDC | 0 | 0 | 0 | 0 |
| 1757864675 | 3.23 VDC | 0 | 0 | 0 | 0 |
| 1757864645 | 3.2 VDC | 0 | 0 | 0 | 0 |
| 1757864630 | 3.2 VDC | 0 | 0 | 0 | 0 |
| 1757864605 | 3.22 VDC | 0 | 0 | 0 | 0 |
| 1757864590 | 3.22 VDC | 0 | 0 | 0 | 0 |
| 1757864561 | 3.24 VDC | 0 | 0 | 0 | 0 |
| 1757859122 | 3.21 VDC | 0 | 0 | 0 | 0 |
| 1757859097 | 3.22 VDC | 0 | 0 | 0 | 0 |
| 1757859083 | 3.22 VDC | 0 | 0 | 0 | 0 |
| 1757859061 | 3.19 VDC | 0 | 0 | 0 | 0 |
| 1757858997 | 3.23 VDC | 0 | 0 | 0 | 0 |
| 1757858981 | 3.16 VDC | 0 | 0 | 0 | 0 |
| 1757858908 | 3.23 VDC | 0 | 0 | 0 | 0 |
| 1757858888 | 3.2 VDC | 0 | 0 | 0 | 0 |
| 1757858872 | 3.2 VDC | 0 | 0 | 0 | 0 |
| 1757858840 | 3.23 VDC | 0 | 0 | 0 | 0 |
| 1757858673 | 3.23 VDC | 0 | 0 | 0 | 0 |
| 1757858646 | 3.19 VDC | 0 | 0 | 0 | 0 |
| 1757858631 | 3.16 VDC | 0 | 0 | 0 | 0 |
| 1757858590 | 3.19 VDC | 0 | 0 | 0 | 0 |
| 1757858575 | 3.21 VDC | 0 | 0 | 0 | 0 |
| 1757858560 | 3.21 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)