This is the latest recevied telemetry packets stored in our database for station/object SP3ZBY-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773168298 | 125 Count | 115 Count | 115 Count | 4 VDC | 0 VDC |
| 1773166497 | 106 Count | 97 Count | 97 Count | 4 VDC | 0 VDC |
| 1773164696 | 95 Count | 87 Count | 87 Count | 4 VDC | 0 VDC |
| 1773162896 | 85 Count | 78 Count | 78 Count | 4 VDC | 0 VDC |
| 1773161105 | 75 Count | 69 Count | 69 Count | 4 VDC | 0 VDC |
| 1773159304 | 64 Count | 59 Count | 59 Count | 4 VDC | 0 VDC |
| 1773157503 | 54 Count | 50 Count | 50 Count | 4 VDC | 0 VDC |
| 1773155702 | 43 Count | 40 Count | 40 Count | 3.99 VDC | 0 VDC |
| 1773153901 | 32 Count | 30 Count | 30 Count | 4 VDC | 0 VDC |
| 1773152101 | 21 Count | 20 Count | 20 Count | 4.01 VDC | 0 VDC |
| 1773150300 | 10 Count | 10 Count | 10 Count | 4 VDC | 0 VDC |
| 1773148499 | 754 Count | 1016 Count | 702 Count | 4 VDC | 0 VDC |
| 1773146698 | 721 Count | 984 Count | 670 Count | 3.99 VDC | 0 VDC |
| 1773143097 | 624 Count | 888 Count | 575 Count | 4 VDC | 0 VDC |
| 1773139592 | 577 Count | 842 Count | 530 Count | 4 VDC | 0 VDC |
| 1773137791 | 565 Count | 832 Count | 520 Count | 4 VDC | 0 VDC |
| 1773135990 | 554 Count | 822 Count | 510 Count | 4.01 VDC | 0 VDC |
| 1773134189 | 535 Count | 803 Count | 492 Count | 4 VDC | 0 VDC |
| 1773132388 | 522 Count | 791 Count | 480 Count | 4 VDC | 0 VDC |
| 1773130587 | 509 Count | 778 Count | 468 Count | 4 VDC | 0 VDC |
| 1773128786 | 496 Count | 766 Count | 456 Count | 4 VDC | 0 VDC |
| 1773126985 | 484 Count | 738 Count | 445 Count | 4 VDC | 0 VDC |
| 1773125185 | 471 Count | 702 Count | 433 Count | 4.01 VDC | 0 VDC |
| 1773123384 | 457 Count | 666 Count | 421 Count | 4 VDC | 0 VDC |
| 1773121583 | 445 Count | 645 Count | 410 Count | 4 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)