This is the latest recevied telemetry packets stored in our database for station/object SP3ZBY-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765645718 | 679 Count | 312 Count | 173 Count | 4 VDC | 0 VDC |
| 1765643917 | 678 Count | 310 Count | 173 Count | 4 VDC | 0 VDC |
| 1765642116 | 677 Count | 310 Count | 173 Count | 4 VDC | 0 VDC |
| 1765640316 | 673 Count | 305 Count | 170 Count | 4 VDC | 0 VDC |
| 1765638515 | 672 Count | 304 Count | 170 Count | 4 VDC | 0 VDC |
| 1765636714 | 671 Count | 303 Count | 170 Count | 4 VDC | 0 VDC |
| 1765634913 | 670 Count | 303 Count | 170 Count | 4 VDC | 0 VDC |
| 1765633112 | 668 Count | 301 Count | 169 Count | 3.99 VDC | 0 VDC |
| 1765631311 | 667 Count | 301 Count | 169 Count | 4 VDC | 0 VDC |
| 1765629510 | 666 Count | 300 Count | 169 Count | 4 VDC | 0 VDC |
| 1765627710 | 665 Count | 298 Count | 169 Count | 4 VDC | 0 VDC |
| 1765625909 | 663 Count | 296 Count | 168 Count | 4 VDC | 0 VDC |
| 1765624118 | 662 Count | 296 Count | 168 Count | 4 VDC | 0 VDC |
| 1765622317 | 661 Count | 296 Count | 168 Count | 4 VDC | 0 VDC |
| 1765620516 | 660 Count | 296 Count | 168 Count | 4 VDC | 0 VDC |
| 1765618715 | 659 Count | 296 Count | 168 Count | 3.99 VDC | 0 VDC |
| 1765616915 | 658 Count | 296 Count | 168 Count | 4 VDC | 0 VDC |
| 1765615114 | 657 Count | 296 Count | 168 Count | 4 VDC | 0 VDC |
| 1765613313 | 656 Count | 296 Count | 168 Count | 4 VDC | 0 VDC |
| 1765611512 | 655 Count | 296 Count | 168 Count | 4 VDC | 0 VDC |
| 1765609711 | 654 Count | 296 Count | 168 Count | 3.99 VDC | 0 VDC |
| 1765607910 | 653 Count | 296 Count | 168 Count | 4 VDC | 0 VDC |
| 1765606109 | 652 Count | 296 Count | 168 Count | 4 VDC | 0 VDC |
| 1765604308 | 651 Count | 296 Count | 168 Count | 4 VDC | 0 VDC |
| 1765602518 | 650 Count | 296 Count | 168 Count | 3.99 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)