This is the latest recevied telemetry packets stored in our database for station/object SQ1BHQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762351448 | 739 Count | 871 Count | 554 Count | 4.31 VDC | 0.14 VDC |
| 1762349645 | 734 Count | 864 Count | 550 Count | 4.29 VDC | 0.14 VDC |
| 1762346202 | 733 Count | 864 Count | 550 Count | 4.24 VDC | 0.14 VDC |
| 1762344400 | 726 Count | 853 Count | 544 Count | 4.24 VDC | 0.14 VDC |
| 1762342597 | 719 Count | 842 Count | 538 Count | 4.27 VDC | 0.14 VDC |
| 1762340793 | 714 Count | 835 Count | 534 Count | 4.31 VDC | 0.14 VDC |
| 1762338990 | 709 Count | 828 Count | 530 Count | 4.31 VDC | 0.14 VDC |
| 1762337188 | 704 Count | 821 Count | 526 Count | 4.28 VDC | 0.14 VDC |
| 1762335418 | 699 Count | 814 Count | 522 Count | 4.29 VDC | 0.14 VDC |
| 1762333615 | 694 Count | 807 Count | 518 Count | 4.23 VDC | 0.14 VDC |
| 1762331812 | 689 Count | 800 Count | 514 Count | 4.3 VDC | 0.14 VDC |
| 1762330010 | 684 Count | 793 Count | 510 Count | 4.29 VDC | 0.14 VDC |
| 1762328207 | 679 Count | 786 Count | 506 Count | 4.25 VDC | 0.14 VDC |
| 1762326404 | 674 Count | 779 Count | 502 Count | 4.24 VDC | 0.14 VDC |
| 1762324601 | 669 Count | 772 Count | 498 Count | 4.25 VDC | 0.14 VDC |
| 1762322798 | 656 Count | 749 Count | 486 Count | 4.26 VDC | 0.14 VDC |
| 1762320996 | 650 Count | 740 Count | 481 Count | 4.3 VDC | 0.14 VDC |
| 1762319193 | 645 Count | 733 Count | 477 Count | 4.28 VDC | 0.14 VDC |
| 1762317390 | 640 Count | 726 Count | 473 Count | 4.24 VDC | 0.14 VDC |
| 1762313817 | 629 Count | 711 Count | 464 Count | 4.23 VDC | 0.14 VDC |
| 1762312015 | 624 Count | 704 Count | 460 Count | 4.25 VDC | 0.14 VDC |
| 1762310212 | 614 Count | 687 Count | 451 Count | 4.31 VDC | 0.14 VDC |
| 1762308409 | 609 Count | 680 Count | 447 Count | 4.26 VDC | 0.14 VDC |
| 1762306606 | 604 Count | 673 Count | 443 Count | 4.27 VDC | 0.14 VDC |
| 1762304803 | 599 Count | 666 Count | 439 Count | 4.29 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)