This is the latest recevied telemetry packets stored in our database for station/object CE3WIT-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732428843 | 4.78 VDC | 0 | 0 | 0 | 0 |
| 1732427943 | 4.83 VDC | 0 | 0 | 0 | 0 |
| 1732427043 | 4.32 VDC | 0 | 0 | 0 | 0 |
| 1732426143 | 4.34 VDC | 0 | 0 | 0 | 0 |
| 1732425242 | 4.37 VDC | 0 | 0 | 0 | 0 |
| 1732424342 | 4.32 VDC | 0 | 0 | 0 | 0 |
| 1732423442 | 4.6 VDC | 0 | 0 | 0 | 0 |
| 1732422542 | 4.1 VDC | 0 | 0 | 0 | 0 |
| 1732421642 | 4.46 VDC | 0 | 0 | 0 | 0 |
| 1732420742 | 4.3 VDC | 0 | 0 | 0 | 0 |
| 1732419842 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1732418942 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1732418042 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1732417142 | 4.48 VDC | 0 | 0 | 0 | 0 |
| 1732416242 | 4.32 VDC | 0 | 0 | 0 | 0 |
| 1732415342 | 4.39 VDC | 0 | 0 | 0 | 0 |
| 1732414442 | 4.81 VDC | 0 | 0 | 0 | 0 |
| 1732413542 | 4.75 VDC | 0 | 0 | 0 | 0 |
| 1732412641 | 4.11 VDC | 0 | 0 | 0 | 0 |
| 1732411741 | 4.63 VDC | 0 | 0 | 0 | 0 |
| 1732410841 | 4.12 VDC | 0 | 0 | 0 | 0 |
| 1732409941 | 4.29 VDC | 0 | 0 | 0 | 0 |
| 1732409041 | 4.32 VDC | 0 | 0 | 0 | 0 |
| 1732408606 | 4.34 VDC | 0 | 0 | 0 | 0 |
| 1732407706 | 4.53 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)